...leaner, it can be used to hoover up dry materials. Don't try to vacuum wet materials as it will cause the bag to split.
...
636 bytes (99 words) - 11:31, 29 December 2023
Impact drivers are used to quickly and efficiently drive screws into materials like wood.
...
151 bytes (21 words) - 12:12, 13 December 2023
...aked eye. This wavelength of light is suitable for cutting through organic materials that burn easily such as plywood, MDF, and acrylic.
...Laser Cutter Materials|approved materials list]] before cutting.''' Some materials are unsafe to cut because of hazardous fumes or combustion byproducts. You
...
2 KB (318 words) - 10:23, 17 May 2024
== Cost of materials ==
The Maker Space aims to provide free materials (where reasonable!) for staff and students at the University so there are n
...
3 KB (566 words) - 17:17, 14 December 2023
...terials - there is a selection available in the boxes next to the machine. Materials range from PETG and ABS to HIPS and EVA foam.
It is possible to use custom materials in the machine but it requires a bit of experimentation to determine the op
...
4 KB (579 words) - 10:49, 3 June 2024
...aked eye. This wavelength of light is suitable for cutting through organic materials that burn easily such as plywood, MDF, and acrylic.
...Laser Cutter Materials|approved materials list]] before cutting.''' Some materials are unsafe to cut because of hazardous fumes or combustion byproducts. You
...
3 KB (527 words) - 10:50, 2 May 2024
...gloves|Nitrile Gloves|You must wear nitrile gloves when working with epoxy materials. Dispose of these safely in the general waste when you have finished workin
...lasses|Safety Glasses|You must wear safety glasses when working with epoxy materials, especially if you are working overhead or with a high risk of dripping glu
...
2 KB (290 words) - 19:32, 25 September 2024
=== Primer for excellent quality finishes, and weird materials ===
Not all paint will stick to all materials. Sometimes you need to have a primer paint in between which has good adhesi
...
4 KB (664 words) - 16:26, 21 December 2023
...your own material check out the [[Approved Laser Cutter Materials|Approved Materials list]].
...
4 KB (689 words) - 10:32, 10 January 2024
Materials used in CNC machining are split into general groups known as ISO material c
...
1 KB (170 words) - 12:55, 29 December 2023
...it uses easy to change filament material as feed stock. We keep a range of materials in stock - typically 17-4 PH stainless steel and copper, but our supplier k
A variety of materials are available to print with - usually we have 17-4PH Stainless Steel loaded
...
3 KB (527 words) - 11:17, 12 January 2024
...Laser Cutter Materials|approved materials list]] before cutting.''' Some materials are unsafe to cut because of hazardous fumes or combustion byproducts. You
...
5 KB (840 words) - 10:52, 2 May 2024
...gloves|Nitrile Gloves|You must wear nitrile gloves when working with epoxy materials. Dispose of these safely in the general waste when you have finished workin
...lasses|Safety Glasses|You must wear safety glasses when working with epoxy materials, especially if you are working overhead or with a high risk of dripping glu
...
3 KB (514 words) - 12:01, 18 March 2024
When changing between materials you can place a rag into the conveyor - this will drag through any material
...
1 KB (245 words) - 18:46, 15 December 2023
Contact adhesive is excellent at gluing flexible materials together, or to other hard surfaces. You could use it to glue vinyl to plyw
* You may wish to use a roller to apply even pressure to the materials being glued.
...
4 KB (589 words) - 10:03, 26 September 2024
...ard-general|Approved Materials Only|You are only permitted to cut approved materials. }}
...
5 KB (750 words) - 12:28, 29 December 2023
...ory:CNC Machinery|CNC machines]], or the [[Approved Laser Cutter Materials|materials available]] for processes like [[:Category:Laser Cutter|laser cutting]] or
...
6 KB (838 words) - 14:25, 25 November 2024
[https://hobarts.com/collections/wood?gf_417407=Materials-Wood-MDF Hobarts]
[[Category:Materials]]
...
3 KB (412 words) - 11:11, 17 May 2024
...us Colours)|3D printing resin]]. Review the COSHH overview pages for these materials before starting work.
...
3 KB (416 words) - 15:09, 22 February 2024
We don't charge for the fair use of 3D printing materials, but there are practical considerations. A full reel of material is 750g, s
We don't charge for materials, and there are very few restrictions on what you can print. We do like to k
...
10 KB (1,727 words) - 16:35, 28 August 2024
