This dust extractor is used for both the [[AXYZ Innovator|AXYZ Innovator CNC router]]
...ly. The fine dust collected may be hazardous - make sure you are wearing a dust mask when emptying the collection bins.
...
433 bytes (67 words) - 12:37, 13 December 2023
...sk to prevent inhalation of paint droplets. Do not spray paint without the extraction turned on. Do not spray paint in any area except the dedicated spray area.}
* Make sure the extractor is turned on. This is the "Laser Cutter Extraction" switch near the Technician's Office as you enter the Maker Space.
...
3 KB (416 words) - 16:30, 21 December 2023
..., glass fibre, and similar.) You must use the machines with dedicated dust extraction in the composites laboratory.
...
1 KB (195 words) - 09:53, 27 August 2024
...ator|You must use this material in the ventilated extraction area with the extraction turned on, otherwise you may need to use an appropriate respirator. Ask a t
...in a well ventilated area|Use only in ventilated extraction area with the extraction fan turned on. }}
...
4 KB (589 words) - 10:03, 26 September 2024
..., glass fibre, and similar.) You must use the machines with dedicated dust extraction in the composites laboratory.
...
2 KB (374 words) - 10:01, 12 March 2024
