Anycubic Wash & Cure 3
 | This placeholder article needs more information adding to it. More details are coming soon, if you can please ask the technical staff for a wiki account and help out. |
Parts which have been 3D printed need to be washed to remove excess resin, and then post cured to ensure the parts are at full hardness. This machine automates this process somewhat and results in very clean, finished parts.
 | |
| DLP-process resin printer | |
| Equipment Information | |
|---|---|
| Status | Unknown |
| Manufacturer | Anycubic |
| Model | Wash & Cure 3 |
| Working Area | 200 mm x 218 mm x 123 mm |
| Maker Space Information | |
| Training Required | Yes |
| Training Information | Here |
Training
Please ask a member of technical staff to be shown how to use this equipment. Training will be included in the instruction for the Anycubic Photon Mono M5S printer.
Usage
Removing parts from the build plate
Take care to remove parts from the build plate safely before putting them in the cure station. Click through for information on removing parts.
Washing and curing parts
Click through for instructions for using the washing and curing features of the machine.