User contributions for A.Dunbar

15 December 2023

• 18:5118:51, 15 December 2023 diff hist +37‎ Power Up and Power Down (Haas ST-15Y) ‎No edit summary current Tag: Visual edit
• 18:5018:50, 15 December 2023 diff hist +860‎ Power Up and Power Down (Haas ST-15Y) ‎No edit summary Tag: Visual edit
• 18:4618:46, 15 December 2023 diff hist +19‎ Chip Conveyor (Haas ST-15Y) ‎No edit summary current Tag: Visual edit
• 18:4618:46, 15 December 2023 diff hist +1,353‎ N Chip Conveyor (Haas ST-15Y) ‎ Created page with "{{SafetyInfoMissing}} Unlike the 5-axis mill this machine has a chip conveyor - it automatically scoops chips and swarf from the bottom of the machine and deposits them into a barrel or chip bin. '''Swarf from a lathe is hazardous - often it is incredibly sharp. It will cut you easily. Do not move swarf around bare handed, and use an appropriate tool when you need to.''' '''Do not touch to interact with any part of the chip conveyor while it is in motion.''' == Oper..." Tag: Visual edit
• 18:4018:40, 15 December 2023 diff hist +392‎ Troubleshooting (Haas ST-15Y) ‎No edit summary Tag: Visual edit
• 18:3718:37, 15 December 2023 diff hist +1,946‎ N Power Up and Power Down (Haas ST-15Y) ‎ Created page with "== Turning the machine on == * Press the green '''Power On''' button. Follow the instructions that appear on the screen. * Pay special attention to where the turret is located and whether it will collide with anything when it rotates to index itself. == Turning the machine off == '''You must wear work gloves when clearing out swarf from the lathe. Swarf can be incredibly sharp.''' Clean the inside of the machine enclosure using a brush and the air hose. Brush any chi..." Tag: Visual edit
• 18:2418:24, 15 December 2023 diff hist +875‎ N ISO Material Codes ‎ Created page with "{{Stub}} == ISO Material Codes == Materials used in CNC machining are split into general groups known as ISO material codes. When you are selecting a turning insert, drill, or other cutting tool you should look at the ISO material group the tool is suited for. This is especially important in turning tool inserts which have geometry which is very specialised and specific to the material group it is designed for. {| class="wikitable" | '''P''' | '''M''' | '''K''' | ''..." Tag: Visual edit
• 18:1918:19, 15 December 2023 diff hist +440‎ Klamp DKF65A6 ‎No edit summary current Tag: Visual edit
• 18:1418:14, 15 December 2023 diff hist 0‎ N File:Klamp-quick-change-tool.jpg ‎No edit summary current
• 18:1418:14, 15 December 2023 diff hist 0‎ N File:Klamp-collets-dec-2023.jpg ‎No edit summary current
• 18:1318:13, 15 December 2023 diff hist 0‎ m Haas ST-15Y ‎ →‎Usage information Tag: Visual edit
• 18:1318:13, 15 December 2023 diff hist +287‎ Haas ST-15Y ‎ →‎Usage information Tag: Visual edit
• 18:1118:11, 15 December 2023 diff hist +2‎ m Style Guide ‎ →‎Page Names & Titles current Tag: Visual edit
• 18:1118:11, 15 December 2023 diff hist +865‎ Style Guide ‎No edit summary Tag: Visual edit
• 18:0418:04, 15 December 2023 diff hist +278‎ Tailstock (Haas ST-15Y) ‎ →‎Foot switch current Tag: Visual edit
• 18:0018:00, 15 December 2023 diff hist 0‎ N File:Haas-st-15y-tailstock-footswitch.jpg ‎No edit summary current
• 18:0018:00, 15 December 2023 diff hist +21‎ Tailstock (Haas ST-15Y) ‎No edit summary Tag: Visual edit
• 17:5917:59, 15 December 2023 diff hist +57‎ Centres and Centre Drilling (Haas ST-15Y) ‎No edit summary current Tag: Visual edit
• 17:5817:58, 15 December 2023 diff hist −125‎ Centres and Centre Drilling (Haas ST-15Y) ‎No edit summary Tag: Visual edit
• 17:5617:56, 15 December 2023 diff hist +3,851‎ N Tailstock (Haas ST-15Y) ‎ Created page with "In order to support long material the lathe has a hybrid hydraulic-manual tailstock. This tailstock can hold tools with an MT3 taper, such as a live centre. Always remove tools from the tailstock to reduce the risk of collisions with the tool turret. == Inserting tools into the tailstock taper == It is crucially important that the taper of the tool and the taper in the ram of the tailstock is impeccably clean. An..." Tag: Visual edit
• 17:5217:52, 15 December 2023 diff hist +54‎ N File:Haas-st-15y-hydraulic-regulator-panel.jpg ‎No edit summary current
• 17:2317:23, 15 December 2023 diff hist +333‎ Haas ST-15Y ‎ →‎Usage information Tag: Visual edit
• 17:2217:22, 15 December 2023 diff hist +2,095‎ N Centres and Centre Drilling (Haas ST-15Y) ‎ Created page with "Workpieces cannot extend more than 4 to 5 times their diameter from the chuck or they start to wobble and whip. With care it is possible to make cuts at such extensions, but heavy cutting work needs to be supported by a live centre in the tailstock. The tailstock is a hybrid manual-hydraulic design. The body of the tailstock must be brought forward toward the chuck, and then the hydraulic quill should be extended so the live centre tip rests securely in the seat created..." Tag: Visual edit
• 17:2017:20, 15 December 2023 diff hist +48‎ N File:Centre-drilling.png ‎No edit summary current
• 17:1417:14, 15 December 2023 diff hist −66‎ m Haas ST-15Y ‎ →‎More Information Tag: Visual edit
• 17:1217:12, 15 December 2023 diff hist +350‎ Haas ST-15Y ‎ →‎Usage information Tag: Visual edit
• 17:1017:10, 15 December 2023 diff hist +236‎ Haas ST-15Y ‎ →‎Usage information Tag: Visual edit
• 17:0917:09, 15 December 2023 diff hist +2,069‎ Klamp DKF65A6 ‎No edit summary Tag: Visual edit
• 16:5616:56, 15 December 2023 diff hist −1‎ Tool Library (Haas ST-15Y) ‎ →‎Tool 9999T Tag: Visual edit
• 16:5616:56, 15 December 2023 diff hist +50‎ Tool Library (Haas UMC-500) ‎ →‎Tool Numbering Tag: Visual edit
• 16:5416:54, 15 December 2023 diff hist 0‎ N Category:Fusion 360 ‎ Created blank page current Tag: Visual edit: Switched
• 16:5416:54, 15 December 2023 diff hist +1,712‎ N Tool Library (Haas UMC-500) ‎ Created page with "{{Stub}} == Fusion 360 Tool Library == The standard tool libraries for the UMC-500 are available on the Microsoft Teams group, under the "CNC Machinery" channel. Look in the Files tab. All the tools - mills, drills, etc. are all in one library and can be filtered down using the facility in Fusion 360's tool library. You should periodically check for a new version of the tool library - it is often updated with new tools or new feeds and speeds. == Tool Numbering ==..." Tag: Visual edit
• 16:4116:41, 15 December 2023 diff hist +29‎ Haas UMC-500 ‎No edit summary Tag: Visual edit
• 16:4016:40, 15 December 2023 diff hist +29‎ OMAX Maxiem 1515 ‎No edit summary Tag: Visual edit
• 16:4016:40, 15 December 2023 diff hist +29‎ AXYZ Innovator ‎No edit summary Tag: Visual edit
• 16:4016:40, 15 December 2023 diff hist +22‎ Nikon Altera 10108 ‎No edit summary Tag: Visual edit
• 16:3916:39, 15 December 2023 diff hist +844‎ Haas ST-15Y ‎No edit summary Tag: Visual edit
• 16:3916:39, 15 December 2023 diff hist +58‎ Template:SafetyInfoMissing ‎No edit summary
• 16:3816:38, 15 December 2023 diff hist +260‎ N Template:SafetyInfoMissing ‎ Created page with "Category:Safety Information Missing {{fmbox | type = warning | text = This machine or process is missing safety information. Please make sure you check the rick assessments and datasheets in person - ask a member of technical staff if you are unsure. }}"
• 16:2816:28, 15 December 2023 diff hist +43‎ m Threading (Haas ST-15Y) ‎No edit summary current Tag: Visual edit
• 16:2716:27, 15 December 2023 diff hist +856‎ Threading (Haas ST-15Y) ‎No edit summary Tag: Visual edit
• 16:2616:26, 15 December 2023 diff hist 0‎ N File:Partial-vs-full-threading-inserts.png ‎No edit summary current
• 14:5814:58, 15 December 2023 diff hist +2,442‎ N Threading (Haas ST-15Y) ‎ Created page with "== OD Threads with a partial-form threading insert == A partial form threading insert has a sharp point to it - much sharper than the radiused base of a full-form threading insert. Because of this extra care must be taken to ensure the thread is cut to proper depth. For a longer production run of parts where the thread form has to be perfect it is recommended that you use a full profile threading insert. If you are trying to cut a thread and it just seems like it isn't..." Tag: Visual edit
• 14:5614:56, 15 December 2023 diff hist 0‎ N File:Thread-form-diagram.png ‎No edit summary current
• 14:5514:55, 15 December 2023 diff hist +455‎ Tool Library (Haas ST-15Y) ‎No edit summary Tag: Visual edit
• 14:4914:49, 15 December 2023 diff hist −6‎ Troubleshooting (Haas ST-15Y) ‎No edit summary Tag: Visual edit
• 14:4814:48, 15 December 2023 diff hist +779‎ N Troubleshooting (Haas ST-15Y) ‎ Created page with "== Program/CAM Problems == thumb|250x250px|Live Tool checkbox in the Post Processor tab of the tool editor. === When I start drilling a hole the live tooling motor turns on and the main spindle doesn't turn. === Don't try to drill with a static tool and a static spindle - it won't work! You have the "Live Tool" option selected in the Post Processor tab of the tool you are trying to drill with. Uncheck this box to use the main spin..." Tag: Visual edit
• 14:4714:47, 15 December 2023 diff hist 0‎ N File:F360-live-tool-checkbox.png ‎No edit summary current
• 14:4314:43, 15 December 2023 diff hist +269‎ Tool Library (Haas ST-15Y) ‎No edit summary Tag: Visual edit
• 12:3912:39, 15 December 2023 diff hist +1,032‎ N Tool Library (Haas ST-15Y) ‎ Created page with "{{Stub}} == Tool 9999 == Tools which do not typically live in the lathe are referred to in the Fusion 360 Tool Library as tool number 9999. You must load the tools into the machine in slots which make sense and will not cause a collision or crash. Update the tool number in Fusion 360 by right clicking on an operation which uses the tool, selecting "Edit Tool" and then change the tool number in the Post Processor tab. If you forget to update this value the post process..." Tag: Visual edit