All public logs
Combined display of all available logs of Make In Salford. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 10:41, 2 December 2024 A.Dunbar talk contribs created page Setting the Z-height (OMAX Maxiem 1515) (Created page with "Setting the Z-height, or the distance from the tip of the nozzle to the material, is an important part of making accurate parts with the waterjet cutter. If the nozzle is too close you run the risk of blocking the nozzle and filling the abrasive hopper with water. If it's too far away, the accuracy of your parts will suffer. The process of setting the Z-height must be done each time the material is changed over, or if the material height changes significantly. === I...") Tag: Visual edit
- 14:25, 25 November 2024 A.Dunbar talk contribs created page File:Epilog-fusion-pro-36.jpg
- 14:25, 25 November 2024 A.Dunbar talk contribs uploaded File:Epilog-fusion-pro-36.jpg
- 14:22, 25 November 2024 A.Dunbar talk contribs created page Connecting to the Laser Cutter (Epilog Fusion Edge Fibre) (Created page with "It's best to use the PC next to the Fusion Edge. The laser cutter connects to the university network, so you should be able to use any of the Maker Space PCs to send cut jobs. The first time you log on and use the laser cutter you may need to add the machine to the configuration. Unfortunately the automatic recognition of the machine over the network does not work with this machine so you will have to configure it manually. Follow the instructions here, or on the instr...") Tag: Visual edit
- 14:21, 25 November 2024 A.Dunbar talk contribs created page Connecting to the Laser Cutter (Epilog Fusion Pro 36) (Created page with " {| class="wikitable" |+ | |Turn on the laser cutter power. Wait for the machine to start up and home itself before continuing with the next steps. |- |thumb|300x300px|none |Open '''Epilog Job Manager''' from the Start Menu or the Desktop. |- |thumb|300x300px|none |If the Fusion Edge 36 is listed as a laser then you are done - start laser cutting! If the machine ''isn't'' shown click o...") Tag: Visual edit: Switched
- 09:51, 26 September 2024 A.Dunbar talk contribs created page File:MSDS - Screwfix - No Nonsense Contact Adhesive Spray.pdf
- 09:51, 26 September 2024 A.Dunbar talk contribs uploaded File:MSDS - Screwfix - No Nonsense Contact Adhesive Spray.pdf
- 20:15, 25 September 2024 A.Dunbar talk contribs created page File:TDS - Pennine Lubricants - Ultrasol X-777.pdf
- 20:15, 25 September 2024 A.Dunbar talk contribs uploaded File:TDS - Pennine Lubricants - Ultrasol X-777.pdf
- 19:28, 25 September 2024 A.Dunbar talk contribs created page File:TDS - Smooth-on - XTC-3D.pdf
- 19:28, 25 September 2024 A.Dunbar talk contribs uploaded File:TDS - Smooth-on - XTC-3D.pdf
- 19:28, 25 September 2024 A.Dunbar talk contribs created page File:MSDS - SmoothOn - XTC-3D.pdf
- 19:28, 25 September 2024 A.Dunbar talk contribs uploaded File:MSDS - SmoothOn - XTC-3D.pdf
- 19:01, 25 September 2024 A.Dunbar talk contribs created page File:MSDS - Mann Release Technologies - Ease Release 400.pdf
- 19:01, 25 September 2024 A.Dunbar talk contribs uploaded File:MSDS - Mann Release Technologies - Ease Release 400.pdf
- 14:27, 25 September 2024 A.Dunbar talk contribs created page File:MSDS-Pennine-Lubricants-Ultrasol-X777.pdf
- 14:27, 25 September 2024 A.Dunbar talk contribs uploaded File:MSDS-Pennine-Lubricants-Ultrasol-X777.pdf
- 09:01, 25 September 2024 A.Dunbar talk contribs created page File:Dima3D - Dimafix Aerosol - 400ml.pdf
- 09:01, 25 September 2024 A.Dunbar talk contribs uploaded File:Dima3D - Dimafix Aerosol - 400ml.pdf
- 08:56, 25 September 2024 A.Dunbar talk contribs created page File:Pictogram ppe-respirator.png
- 08:56, 25 September 2024 A.Dunbar talk contribs uploaded File:Pictogram ppe-respirator.png
- 13:13, 24 September 2024 A.Dunbar talk contribs created page File:MSDS-Magnalube - Magnalube Grease.pdf
- 13:13, 24 September 2024 A.Dunbar talk contribs uploaded File:MSDS-Magnalube - Magnalube Grease.pdf
- 13:11, 24 September 2024 A.Dunbar talk contribs created page File:MSDS-Singer-Super-Oil.pdf
- 13:11, 24 September 2024 A.Dunbar talk contribs uploaded File:MSDS-Singer-Super-Oil.pdf
- 13:09, 24 September 2024 A.Dunbar talk contribs created page File:MSDS-Swagelok-Blue-Goop-Thread-Lubricant.pdf
- 13:09, 24 September 2024 A.Dunbar talk contribs uploaded File:MSDS-Swagelok-Blue-Goop-Thread-Lubricant.pdf
- 13:04, 24 September 2024 A.Dunbar talk contribs created page File:MSDS - Axminster - Machine Wax.pdf
- 13:04, 24 September 2024 A.Dunbar talk contribs uploaded File:MSDS - Axminster - Machine Wax.pdf
- 12:59, 24 September 2024 A.Dunbar talk contribs created page File:MSDS-Jet-Lube-Arctic-Grease.pdf
- 12:59, 24 September 2024 A.Dunbar talk contribs uploaded File:MSDS-Jet-Lube-Arctic-Grease.pdf
- 12:59, 24 September 2024 A.Dunbar talk contribs created page File:MSDS-Draper-Air-Tool-Oil.pdf
- 12:59, 24 September 2024 A.Dunbar talk contribs uploaded File:MSDS-Draper-Air-Tool-Oil.pdf
- 12:57, 24 September 2024 A.Dunbar talk contribs created page File:MSDS-Muc-Off-Wet-Lube.pdf
- 12:57, 24 September 2024 A.Dunbar talk contribs uploaded File:MSDS-Muc-Off-Wet-Lube.pdf
- 12:55, 24 September 2024 A.Dunbar talk contribs created page File:MSDS-WD-40-Specialist-Bike.pdf
- 12:55, 24 September 2024 A.Dunbar talk contribs uploaded File:MSDS-WD-40-Specialist-Bike.pdf
- 14:29, 28 August 2024 A.Dunbar talk contribs created page Phone Stand (Training Part) (Created page with "This introductory part will introduce you to using the CAM workspace inside Fusion 360 to prepare work for use with the AXYZ Innovator CNC router. You will cover - * Importing a material template and 3D model into Fusion 360 * Setting up the material template and stock * Importing a tool library * Creating toolpaths to contour and pocket feature using preset feeds and speeds. * Simulating toolpaths to ensure safe operation *...") Tag: Visual edit
- 14:23, 28 August 2024 A.Dunbar talk contribs created page Training (AXYZ Innovator) (Created page with "It's expected you'll be comfortable using basic Fusion 360 commands - you can open and save files, move parts around and are familiar with the concept of "components" and using the browser tree. For people familiar with Solidworks it is possible to change the mouse commands in the preferences so the orbit and view commands work in a similar manner. == What do I need to do? == Read through the wiki page for the phone stand part below. Follow the instructions in the video...") Tag: Visual edit
- 09:52, 27 August 2024 A.Dunbar talk contribs created page File:Scroll-Saw-Practice-Card-3mmPly-300x400-Landscape.svg
- 09:52, 27 August 2024 A.Dunbar talk contribs uploaded File:Scroll-Saw-Practice-Card-3mmPly-300x400-Landscape.svg
- 10:00, 8 August 2024 A.Dunbar talk contribs deleted page Gravograph LS900 (Machine no longer available for use.)
- 13:48, 12 July 2024 A.Dunbar talk contribs deleted page COSHH - Cutwel - Fungicide High Concentration Additive (content was: "== Storage Location == COSHH Cabinet - Morson Engine Room Return this item to its storage place once you have finished using it. If it is empty, please let a member of technical staff know so more can be ordered. == Manufacturer's Information == * Technical Datasheet (TDS) * Material Safety Datasheet (MSDS) == Pers...", and the only contributor was "COSHH-bot" (talk))
- 12:46, 12 July 2024 A.Dunbar talk contribs created page File:MSDS - Cutwel - Fungicide Ultra.pdf
- 12:46, 12 July 2024 A.Dunbar talk contribs uploaded File:MSDS - Cutwel - Fungicide Ultra.pdf
- 12:46, 12 July 2024 A.Dunbar talk contribs created page File:TDS - Cutwel - Fungicide Ultra.pdf
- 12:46, 12 July 2024 A.Dunbar talk contribs uploaded File:TDS - Cutwel - Fungicide Ultra.pdf
- 15:26, 11 July 2024 A.Dunbar talk contribs created page File:Bambu-studio-plate-selection.png
- 15:26, 11 July 2024 A.Dunbar talk contribs uploaded File:Bambu-studio-plate-selection.png
- 15:26, 11 July 2024 A.Dunbar talk contribs created page File:Bambu-studio-printer-selection.png
