Anycubic Wash & Cure 3: Difference between revisions
Makerspace (talk | contribs) No edit summary |
mNo edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 7: | Line 7: | ||
| image =Anycubic-wash-%26-cure-3.jpg | | image =Anycubic-wash-%26-cure-3.jpg | ||
}} | }} | ||
Parts which have been 3D printed need to be washed to remove excess resin, and then post cured to ensure the parts are at full hardness. This machine automates this process somewhat and results in very clean, | Parts which have been 3D printed need to be washed to remove excess resin, and then post cured to ensure the parts are at full hardness. This machine automates this process somewhat and results in very clean, finished parts. | ||
== Training == | == Training == | ||
Please ask a member of technical staff to be shown how to use this equipment. Training will be included in the instruction for the [[Anycubic Photon Mono M5s|Anycubic Photon Mono M5S printer]]. | Please ask a member of technical staff to be shown how to use this equipment. Training will be included in the instruction for the [[Anycubic Photon Mono M5s|Anycubic Photon Mono M5S printer]]. | ||
== Usage == | |||
=== [[SSW - Removing Parts From the Build Plate (Resin Printing)|Removing parts from the build plate]] === | |||
Take care to remove parts from the build plate safely before putting them in the cure station. Click through for information on removing parts. | |||
=== [[SSW - Washing and Postcuring (Resin Printing)|Washing and curing parts]] === | |||
Click through for instructions for using the washing and curing features of the machine. | |||
[[Category:Equipment]] | [[Category:Equipment]] | ||
[[Category:Resin Printing]] | [[Category:Resin Printing]] | ||
[[Category:3D Printing]] | |||
Latest revision as of 15:23, 22 February 2024
 | This placeholder article needs more information adding to it. More details are coming soon, if you can please ask the technical staff for a wiki account and help out. |
 | |
| DLP-process resin printer | |
| Equipment Information | |
|---|---|
| Status | Unknown |
| Manufacturer | Anycubic |
| Model | Wash & Cure 3 |
| Working Area | 200 mm x 218 mm x 123 mm |
| Maker Space Information | |
| Training Required | Yes |
| Training Information | Here |
Parts which have been 3D printed need to be washed to remove excess resin, and then post cured to ensure the parts are at full hardness. This machine automates this process somewhat and results in very clean, finished parts.
Training
Please ask a member of technical staff to be shown how to use this equipment. Training will be included in the instruction for the Anycubic Photon Mono M5S printer.
Usage
Removing parts from the build plate
Take care to remove parts from the build plate safely before putting them in the cure station. Click through for information on removing parts.
Washing and curing parts
Click through for instructions for using the washing and curing features of the machine.