640
edits
Wear Offsets (Haas ST-15Y): Difference between revisions
Created page with "Inserts and tools used in the lathe wear gradually and relatively predictably. In order to hold tight tolerances on the machine you can offset the tool a small amount to account for the minute wear of the inserts before it is time to replace them. We'll only cover static turning tools here. == Turning Tool Offsets == Access the tool offsets page by pressing '''OFFSETS''' on the lathe control panel. Press F4 if required to switch to the tool offsets page. You should..."
(Created page with "Inserts and tools used in the lathe wear gradually and relatively predictably. In order to hold tight tolerances on the machine you can offset the tool a small amount to account for the minute wear of the inserts before it is time to replace them. We'll only cover static turning tools here. == Turning Tool Offsets == Access the tool offsets page by pressing '''OFFSETS''' on the lathe control panel. Press F4 if required to switch to the tool offsets page. You should...") |
(No difference)
|