COSHH - Unika Color Products Ltd - MitreBond Aerosol Activator

Storage Location

Return this item to its storage place once you have finished using it. If it is empty, please let a member of technical staff know so more can be ordered.

Manufacturer's Information

Technical Datasheet (TDS)
Material Safety Datasheet (MSDS)

Personal Protective Equipment

Nitrile gloves
May cause skin irritation. Superglue used in conjunction with this activator will bond your skin together rapidly and may cause skin irritation. Wear nitrile gloves to protect your skin, and wash your hands after use. You may wish to use a barrier cream to provide further protection.

Safety Glasses
Wear safety glasses to protect against eye exposure. This is especially important if working in a confined space or performing a task where splashing, spray, or drips may occur.

Hazards

Keep out of reach of children

Do not swallow
May cause serious injury if swallowed and enters the airways. Seek immediate medical attention.

Use in a well ventilated area
Fumes and vapours may cause drowsiness or dizziness. Use only in a well ventilated area. Avoid breathing vapours or spray.

May cause skin irritation
Wear nitrile gloves when appropriate. Remove contaminated clothing and wash skin thoroughly with soap and water after exposure.

Flammable
Keep away from naked flames. Do not spray on naked flames or near other sources of ignition, do not use on hot surfaces.

Pressurised container
Pressurised aerosol container may explode if heated. Keep out of direct sunlight. Do not pierce or burn even when empty. Do not expose to temperatures exceeding 50 degrees C.

Usage Information

A little goes a long way. Refer to the
Usage tips 2

== More Information ==Usage Information Label