COSHH - Ambersil - Tufcut Metal Cutting Compound
This cutting compound provides lubrication for drilling and other cutting operations. Use sparingly, a little goes a long way.
Pay particular attention to the hazards and PPE requirements listed below.
Storage Location
COSHH Cabinet - Morson Engine Room
Return this item to its storage place once you have finished using it. If it is empty, please let a member of technical staff know so more can be ordered.
Manufacturer's Information
Personal Protective Equipment
|
Safety Glasses You must wear safety glasses when working with this cutting lubricant. |
|
Gloves may be required You should wear nitrile gloves when working with this cutting lubricant except when working around rotating machinery. Use application tools such as a brush and wash your hands when you have finished work. |
Hazards
|
May cause harm to breastfed babies Pregnant and breast-feeding women must not use this cutting lubricant. Ask a technician to find an alternative. |
|
Keep out of reach of children |
|
Very toxic to aquatic organisms May cause long-term adverse effects in the aquatic environment. Prevent release into the environment. |
|
|
Repeated exposure may cause skin dryness and cracking Reduce exposure by using application tools such as a small brush. Wear gloves when safe to do so and wash your hands with soap and water after use. |
|
|
Use in a well ventilated area May produce smoke during cutting. |
Usage Information
- Use a small acid/flux brush to apply to the work area and the cutting tool. You don't need an excessive amount - large globs will fly off and go everywhere.
- Re-apply regularly during drilling operations to maintain effectiveness.
- Once you have finished remove the bulk of the remaining lubricant with a paper towel, and degrease as required.