Prints not sticking to build plate

1 month ago

George

1 minute

Cleaning a 3D printer build plate

If your 3D prints are failing to stick, start by washing the removable build plate at the main makerspace sink.

Let the build plate cool, then remove it from the printer.
Take it to the main makerspace sink.
Wet the plate with warm water and add a small amount of washing-up liquid.
Gently wash the printing surface with a clean, soft sponge. Avoid abrasive scourers.
Rinse thoroughly with clean water to remove all the washing-up liquid.
Dry with a clean, lint-free cloth and make sure both sides are completely dry.
Hold the plate by its edges to avoid leaving fingerprints on the printing surface.
Refit the plate securely before starting your next print.

Only wash plates suitable for cleaning with water. If you’re unsure, ask a makerspace team member.

For more information, see the link below.