The material isn’t cutting and water sprays everywhere.

• Check that the nozzle does not touch the surface of the material. There must be a minimum gap of the thickness of the Z-setting gauge between the nozzle and the top of the material.
• Check that garnet flows freely through the abrasive supply hose. If there is moisture in the hose, clean it out.
• In some cases, water moves into the tool head mounted garnet hopper. In this case, clean the abrasive solenoid and the hopper. Contact a member of technical staff, they will show you how to clean these parts.

See also: The material isn’t cutting correctly. Water is spraying everywhere but the garnet is flowing.