{"id":757,"date":"2026-09-29T11:23:32","date_gmt":"2026-09-29T10:23:32","guid":{"rendered":"https:\/\/makeinsalford.com\/wiki\/?p=757"},"modified":"2026-09-29T11:54:04","modified_gmt":"2026-09-29T10:54:04","slug":"bambu-lab-h2s","status":"publish","type":"post","link":"https:\/\/makeinsalford.com\/wiki\/3d-printing\/fdm-fff\/757\/bambu-lab-h2s\/","title":{"rendered":"Bambu lab H2S"},"content":{"rendered":"\n<div class=\"wp-block-media-text is-stacked-on-mobile\"><figure class=\"wp-block-media-text__media\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"1024\" src=\"https:\/\/makeinsalford.com\/wiki\/wp-content\/uploads\/2026\/09\/bambu-lab-h2d-combo-32416-1024x1024.jpg\" alt=\"\" class=\"wp-image-763 size-full\" srcset=\"https:\/\/makeinsalford.com\/wiki\/wp-content\/uploads\/2026\/09\/bambu-lab-h2d-combo-32416-1024x1024.jpg 1024w, https:\/\/makeinsalford.com\/wiki\/wp-content\/uploads\/2026\/09\/bambu-lab-h2d-combo-32416-300x300.jpg 300w, https:\/\/makeinsalford.com\/wiki\/wp-content\/uploads\/2026\/09\/bambu-lab-h2d-combo-32416-150x150.jpg 150w, https:\/\/makeinsalford.com\/wiki\/wp-content\/uploads\/2026\/09\/bambu-lab-h2d-combo-32416-768x768.jpg 768w, https:\/\/makeinsalford.com\/wiki\/wp-content\/uploads\/2026\/09\/bambu-lab-h2d-combo-32416.jpg 1200w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure><div class=\"wp-block-media-text__content\">\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Bambu lab H2S build volume<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Width (X-axis):<\/strong> 340 mm<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Depth (Y-axis):<\/strong> 320 mm<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Height (Z-axis):<\/strong> 340 mm<\/p>\n<\/div><\/div>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Setting a print running<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">There is a USB located on the left of the printer.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Insert this USB into one of the Maker Space PC, then save your print file to it from Bambu Studio.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Starting a print<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Insert the USB drive into the USB port.<\/li>\n\n\n\n<li>Select the <strong>Home<\/strong> icon on the left-hand side.<\/li>\n\n\n\n<li>Select <strong>Print File<\/strong>.<\/li>\n\n\n\n<li>Choose the <strong>USB<\/strong> tab.<\/li>\n\n\n\n<li>Tap your file in the list to select it.<\/li>\n\n\n\n<li>If needed, change the filament you are printing with on this screen.<\/li>\n\n\n\n<li>Select <strong>Print Now<\/strong>.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Build plates<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">There are a variety of build plates available, but the most commonly used (textured PEI) combination is loaded into the printer most of the time.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The printer detects which build plate is loaded and compares it to the build plate it is expecting in the sliced g-code file. If it starts complaining, check you&#8217;ve got it the right way around, and that the correct build plate is loaded. Also check that you have select the correct build plate when slicing your parts in Bambu Studio.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The build plate is held to the bed magnetically. To remove it simply pull up from the front, to replace use the guides in the back and slide the plate in at a slight angle until it is seated in the correct position.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Filament<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">This printer uses 1.75mm filament.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Bambu Lab H2S<\/strong>, compatible filaments include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Standard:<\/strong> PLA, PETG, ABS and ASA.<\/li>\n\n\n\n<li><strong>Flexible:<\/strong> TPU.<\/li>\n\n\n\n<li><strong>Engineering:<\/strong> PC (polycarbonate), PA (nylon), PET and PPS.<\/li>\n\n\n\n<li><strong>Soluble support:<\/strong> PVA and BVOH.<\/li>\n\n\n\n<li><strong>Carbon-fibre or glass-fibre reinforced:<\/strong> PLA, PETG, PA, PET, PC, ABS, ASA, PPA and PPS variants.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Unfortunately the <a href=\"https:\/\/www.filamentive.com\/\">Filamentive<\/a> cardboard filament spool doesn&#8217;t fit into the AMS properly (the lid can&#8217;t close) so we use the Bambu Lab filament ordered through <a href=\"https:\/\/www.additive-x.com\/shop\/\">Additive-X<\/a>. Refill packs are recommended to reduce the amount of plastic waste produced.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">More Information<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Bambu lab H2S build volume Width (X-axis): 340 mm Depth (Y-axis): 320 mm Height (Z-axis): 340 mm Setting a print running There is a USB located on the left of the printer. Insert this USB into one of the Maker Space PC, then save your print file to it from Bambu Studio. Starting a print [&hellip;]<\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[21],"tags":[69,24],"class_list":["post-757","post","type-post","status-publish","format-standard","hentry","category-fdm-fff","tag-3d-printing","tag-bambu-lab"],"_links":{"self":[{"href":"https:\/\/makeinsalford.com\/wiki\/wp-json\/wp\/v2\/posts\/757","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/makeinsalford.com\/wiki\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/makeinsalford.com\/wiki\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/makeinsalford.com\/wiki\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/makeinsalford.com\/wiki\/wp-json\/wp\/v2\/comments?post=757"}],"version-history":[{"count":7,"href":"https:\/\/makeinsalford.com\/wiki\/wp-json\/wp\/v2\/posts\/757\/revisions"}],"predecessor-version":[{"id":769,"href":"https:\/\/makeinsalford.com\/wiki\/wp-json\/wp\/v2\/posts\/757\/revisions\/769"}],"wp:attachment":[{"href":"https:\/\/makeinsalford.com\/wiki\/wp-json\/wp\/v2\/media?parent=757"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/makeinsalford.com\/wiki\/wp-json\/wp\/v2\/categories?post=757"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/makeinsalford.com\/wiki\/wp-json\/wp\/v2\/tags?post=757"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}