OMAX Maxiem 1515
|
This is a restricted use machine. You must be specifically trained before using this equipment. Review the self-directed learning information on this page and book in for in-person training with a member of technical staff. |
|
|
Missing Safety Information This machine or process is currently missing safety information. Please make sure you check the risk assessments and datasheets in person - ask a member of technical staff if you are unsure. |
 | This placeholder article needs more information adding to it. More details are coming soon, if you can please ask the technical staff for a wiki account and help out. |
| Waterjet cutter with 5-axis head located in the Morson Engine Room. | |
| Equipment Information | |
|---|---|
| Status | Unknown |
| Manufacturer | OMAX |
| Model | Maxiem 1515 |
| Working Area | 1200 mm x 1200 mm |
| Maker Space Information | |
| Training Required | Yes |
| Training Information | Here |
The waterjet cutter is unique in that it can cut almost any material - including but not limited to aluminium, steel, ceramics, glass, rockwool, and composites! Pretty much the only thing it can't cut is toughened, or tempered, glass.
Mains water is pressurised up to 45,000 PSI (~3000 bar) and then mixed with an abrasive garnet. This mixture "sands" its way through the workpiece in the pattern you have defined. There is an amount of taper evident in thicker materials as the jet of water spreads out into a cone but this can be compensated for by tilting the 5-axis head.
The maximum cutting area of the machine is 1200 mm x 1200 mm, but it's best to keep sheet material under a metre square to ease handling. Maximum thickness varies depending on the material and the accuracy requirements but we've easily cut three inch thick mild steel.
Training
It takes around three hours to learn the basics of using this machine - safety, turning it on, importing files, cutting parts, shutdown, etc.
To book training on this machine please complete the training request form.
Usage Information
Loading Abrasive Garnet
The machine consumes a lot of abrasive garnet while cutting. You may find you run low on garnet during your cutting - ask a member of staff to help you re-stock the bulk abrasive hopper.
Troubleshooting
A few issues crop up repeatedly. If you're having trouble with the router check this page to see if it's something we've come across before.