Axminster G700 Dust Processor

From Make In Salford
Revision as of 12:37, 13 December 2023 by Makerspace (talk | contribs) (Created page with "{{Stub}} This dust extractor is used for both the AXYZ Innovator CNC router and the sandblasting cabinet. It is turned on using the green "RUN" button on the front panel. The collection bags must be emptied regularly. The fine dust collected may be hazardous - make sure you are wearing a dust mask when emptying the collection bins. Category:Equipment Category:Dust Extraction")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


This dust extractor is used for both the AXYZ Innovator CNC router and the sandblasting cabinet. It is turned on using the green "RUN" button on the front panel.

The collection bags must be emptied regularly. The fine dust collected may be hazardous - make sure you are wearing a dust mask when emptying the collection bins.

Retrieved from "https://www.makeinsalford.com/wiki/index.php?title=Axminster_G700_Dust_Processor&oldid=452"