Changing tools (AXYZ Innovator)

From Make In Salford
Revision as of 11:00, 3 February 2025 by A.Dunbar (talk | contribs) (Created page with "The AXYZ Innovator can automatically switch between three different tools, and also has the capability to use additional tools if they are swapped over by hand. == Picking up tools using the ATC == * Clear the safety mat and turn the '''SAFETY RESET''' key. * Type '''F 31.''n''''' and press '''Enter''', where '''''n''''' is the number of the tool you wish to pick up. For example, type F 31.1 to pick up the tool in ATC pocket one, F31.2 for pocket two, or F 31.3 for po...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The AXYZ Innovator can automatically switch between three different tools, and also has the capability to use additional tools if they are swapped over by hand.

Picking up tools using the ATC

  • Clear the safety mat and turn the SAFETY RESET key.
  • Type F 31.n and press Enter, where n is the number of the tool you wish to pick up. For example, type F 31.1 to pick up the tool in ATC pocket one, F31.2 for pocket two, or F 31.3 for pocket three.

Depositing tools from the spindle into the ATC

  • Clear the safety mat and turn the SAFETY RESET key.
  • Type F 34 and press Enter.
  • The machine will deposit the tool currently in the spindle into the ATC holder. If it isn't from the ATC (i.e. the tool number is greater than 3) it will prompt you to remove the tool manually.
Retrieved from "https://www.makeinsalford.com/wiki/index.php?title=Changing_tools_(AXYZ_Innovator)&oldid=1312"