Connecting to the Laser Cutter (Epilog Fusion Edge 36)

	Turn on the laser cutter power. Wait for the machine to start up and home itself before continuing with the next steps.
	Open Epilog Job Manager from the Start Menu or the Desktop.
	If the Fusion Edge 36 is listed as a laser then you are done - start laser cutting! If the machine isn't shown click on Add Laser System. This may be a large button with text in the centre of the screen, or a small plus icon in the top left.
	Click Add Manually.
	Select Fusion Edge as the system series, then Fusion Edge 36 as the laser model. Click Next.
	Select 60 watts for the CO2 laser tube option. Click Next.
	Enter the IP address 146.87.67.51 in the text box. You do not need to enter a serial number. Click Next.
	Give the machine the name Fusion Edge 36. Click Finish, then close Epilog Job Manager.