All public logs

Combined display of all available logs of Make In Salford. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

12:06, 13 December 2023 Makerspace talk contribs created page Formlabs Sift (Created page with "{{Stub}} Parts which are printed on the Formlabs Fuse 1 need to be post-processed before they can be used. This involved removing the excess powder and recycling it. This equipment facilitates the sifting, recycling, and reuse of the unused powder. Category:3D Printing Category:Selective Laser Sintering Category:Equipment") Tag: Visual edit
12:05, 13 December 2023 Makerspace talk contribs created page Peopoly Phenom L (Created page with "{{Stub}} This is a large format DLP process resin printer. Category:Equipment Category:3D Printing Category:Resin Printing") Tag: Visual edit
12:04, 13 December 2023 Makerspace talk contribs created page Anycubic Wash & Cure 3 (Created page with "{{Stub}} Parts which have been 3D printed need to be washed to remove excess resin, and then post cured to ensure the parts are at full hardness. This machine automates this process somewhat and results in very clean, finsihed parts. Category:Equipment Category:3D printing Category:Resin Printing") Tag: Visual edit
12:02, 13 December 2023 Makerspace talk contribs created page Anycubic Photon Mono M5s (Created page with "{{Stub}} This is a high resolution DLP printer, capable of printing very quickly. Category:3D Printing Category:Resin Printing Category:Equipment") Tag: Visual edit
12:01, 13 December 2023 Makerspace talk contribs created page Markforged Wash (Created page with "{{Stub}} Before sintering the parts from the Metal X must be washed in a solvent bath to remove lubricating waxes. The amount of time this washing process takes varies from part to part, depending on the geometry, but typically takes 24 hours or so. Once it has finished washing the solvent must be allowed to evaporate in the evaporation section of the washer. Category:Metal Printing Category:3D Printing Category:Equipment") Tag: Visual edit
11:59, 13 December 2023 Makerspace talk contribs created page Markforged Sinter-1 (Created page with "{{Stub}} This sintering oven converts the raw printed and washed parts from the Metal X printer into solid metal parts. The sinter run varies per material, but typically it takes around 27 hours to complete, reaching temperatures of up to 1600 degrees centigrade. This equipment isn't currently running as we are waiting for the installation of the argon dewar. == Argon supply == The sintering oven will be supplied with bulk argon from a dewar...") Tag: Visual edit
11:30, 13 December 2023 Makerspace talk contribs created page Markforged Metal X (Created page with "{{Stub}} Markforged make this metal 3D printer which prints with filament made up of metal powder in plastic binder. Parts are incredibly fragile until they are sintered into solid metal. == Filament == A variety of materials are available to print with - usually we have 17-4PH Stainless Steel loaded, but we also have A2 tool steel and copper in stock. We are able to order in exotic super alloys like Inconel if the need arises. Category:Fused Deposition Modelling...") Tag: Visual edit
11:20, 13 December 2023 Makerspace talk contribs created page Ultimaker S5 (Created page with "{{Stub}} These Ultimaker printers have the largest build volume of all our printers. == Filament == These printers use 2.85mm diameter filament, typically PLA. Category:3D Printing Category:Fused Deposition Modelling Category:Equipment") Tag: Visual edit
11:19, 13 December 2023 Makerspace talk contribs created page Ultimaker 2+ (Created page with "{{Stub}} This Ultimaker 3D printer comes in two models - the Ultimaker 2+ and the Ultimaker 2+ Extended, which has the same footprint but can print taller models. Models are currently loaded into the machine using the SD card slot on the front panel. == Filament == These printers use 2.85mm diameter filament, typically PLA. Category:Fused Deposition Modelling Category:3D Printing Category:Equipment") Tag: Visual edit
11:17, 13 December 2023 Makerspace talk contribs created page Markforged Mark 2 (Created page with "{{Stub}} The Markforged Mark 2 is an unusual printer in that it will print with nylon filament just like a normal printer, but it can reinforce prints using continuous strands of carbon fibre, fibreglass, or kevlar. This is not material that has been chopped up and mixed into the filament, but actual full lengths of reinforcement. This additional reinforcement material means that the parts, if designed and sliced correctly, can be much stronger than similar FDM 3D pri...") Tag: Visual edit
11:13, 13 December 2023 Makerspace talk contribs created page Formlabs Fuse 1 (Created page with "{{Stub}} The Formlabs uses a laser to sinter finely ground nylon powder into solid parts. The un-sintered power supports the parts as they are printing so you don't need to include support material. == Printing files == This is the only machine in the Maker Space that you will not typically use directly. To ensure material is not wasted we need to have a packing density of typically 30% - this means that we will batch various jobs together and print them all at the sam...") Tag: Visual edit
09:57, 13 December 2023 Makerspace talk contribs created page Bambu Lab X1E (Created page with "{{Stub}} This exceptionally fast 3D printer has an automatic material changer and can be programmed using the micro-SD card slot on the front. Category:3D Printing") Tag: Visual edit
09:56, 13 December 2023 Makerspace talk contribs created page Gravograph LS900 (Created page with "{{RestrictedMachine}}{{Stub}} This CO2 laser has a working area of 600mm x 600mm and a laser tube power of 35 watts. Category:Laser Cutter") Tag: Visual edit
09:53, 13 December 2023 Makerspace talk contribs created page Epilog Fusion Edge (Created page with "{{RestrictedMachine}}{{Stub}} This laser cutter has a fibre laser instead of a CO2 tube. It allows the marking and engraving of metals.") Tag: Visual edit
09:48, 13 December 2023 Makerspace talk contribs created page Epilog Zing 16 (Created page with "{{RestrictedMachine}}{{Stub}} The Epilog Zing 16 is a smaller form factor CO2 laser cutter. If you are working on a lot of smaller parts it may be preferable to use this machine to keep the larger machines free. Category:Laser Cutter Category:Equipment") Tag: Visual edit
09:46, 13 December 2023 Makerspace talk contribs created page Roland GS-24 (Created page with "{{Stub}} This vinyl cutter takes illustrations from Adobe Illustrator and cuts them into adhesive backed vinyl with a sharp blade. == Troubleshooting == Sometimes the print driver that communicates with the vinyl cutter doesn't properly send straight lines for cutting. To resolve this issue rotate your illustration a small amount (0.5 degrees seems to work fine) and re-send the job.") Tag: Visual edit
09:43, 13 December 2023 Makerspace talk contribs created page Template:Stub (Created page with "Category:Stub {{fmbox | type = information | text = This article needs more information adding to it. More details are coming soon, if you can please ask the technical staff for a wiki account and help out. }}")
00:23, 13 December 2023 Makerspace talk contribs created page Template:ArticleOfTheDay (Created page with "<includeonly>{{#ask: + Modification date::+  |format=embedded |limit=1 |searchlabel= |offset={{#expr: ( ( {{#time:U|today}} + {{{2|{{#time:z|today}}} }} + 67 ) * 67 ) mod {{#ask: + Modification date::+  |format=count }} }} }}</includeonly>")
00:19, 13 December 2023 Makerspace talk contribs created page Mayku Multiplier (Created page with "The Mayku Multiplier is a pressure former - it works in a manner similar to a typical vacuum former, but it also uses compressed air to force the material around the mould. This means you can achieve very high fidelity. Category:Equipment") Tag: Visual edit
00:14, 13 December 2023 Makerspace talk contribs created page File:Laser-cutter-extraction-switch.jpg
00:14, 13 December 2023 Makerspace talk contribs uploaded File:Laser-cutter-extraction-switch.jpg
00:13, 13 December 2023 Makerspace talk contribs created page File:Cmm-joystick-control-labelled.png
00:13, 13 December 2023 Makerspace talk contribs uploaded File:Cmm-joystick-control-labelled.png
00:07, 13 December 2023 Makerspace talk contribs created page OMAX Layout (Created page with "OMAX Layout is the software used to create cutting toolpaths for the OMAX Maxiem 1515 waterjet cutter. == Filetypes == You can import a variety of file formats, including DXF, SVG, and AI. == Installing the software == Once you have completed the OMAX waterjet training you will be given the serial numbers for the pump and machine to allow you to download the software from the OMAX website. Category:Waterjet Cutter Category:Software")
00:07, 13 December 2023 Makerspace talk contribs created page OMAX Maxiem 1515 (Created page with "Category:Equipment Category:CNC Machinery Category:Waterjet Cutter {{RestrictedMachine}} The waterjet cutter is unique in that it can cut almost any material - including but not limited to aluminium, steel, ceramics, glass, rockwool, and composites! Pretty much the only thing it can't cut is toughened, or tempered, glass. Mains water is pressurised up to 45,000 PSI (~3000 bar) and then mixed with an abrasive garnet. This mixture "sands" its way through the...")
00:05, 13 December 2023 Makerspace talk contribs created page Haas WIPS Probe (Created page with "Category:Mill == Introduction == The WIPS Work Probe, or Renishaw Probe, is used to located work offsets and automatically probe feature geometry. In conjuction with Fusion 360 it can be used as part of an in-process inspection routine. It runs on batteries and uses infrared light to communicate with the CNC controller. This tool is fragile, and is a piece of precision equipment. Special care must be taken to ensure that the probe body (which unlike the sensing tip...")
00:04, 13 December 2023 Makerspace talk contribs created page File:Hydraulic chuck clamping indicator mark.jpg
00:04, 13 December 2023 Makerspace talk contribs uploaded File:Hydraulic chuck clamping indicator mark.jpg
00:03, 13 December 2023 Makerspace talk contribs created page File:Haas 3-jaw hydraulic chuck.jpg (Haas 8-inch 3-jaw hydraulic chuck mounted in a Haas ST-15Y CNC lathe.)
00:03, 13 December 2023 Makerspace talk contribs uploaded File:Haas 3-jaw hydraulic chuck.jpg (Haas 8-inch 3-jaw hydraulic chuck mounted in a Haas ST-15Y CNC lathe.)
00:02, 13 December 2023 Makerspace talk contribs created page Hydraulic 3-Jaw Chuck (Created page with "Category:Lathe Category:Lathe Workholding alt=A shiny metal chuck holds onto dull steel bar stock. There are three fingers arranged radially around the face of the chuck which slide inwards to grip onto the material in the centre. There is a yellow mark of paint near one of the six screws that hold the chuck in the machine. |thumb|3-jaw chuck clamping on steel bar stock. This chuck is incredibly versatile, and the hardened...")
00:01, 13 December 2023 Makerspace talk contribs created page Klamp DKF65A6 (Created page with "Category:Lathe Category:Lathe Workholding A collet chuck is incredibly easy to use - simply insert the appropriate sized collet, insert your material, and clamp on it. Concentricity is almost guaranteed. The downside is that the clamping range of each collet is limited - plus or minus 0.5mm for our collets. For example, a collet marked 12mm will hold stock sized between 11.5 and 12.5 mm. When selecting stock take into consideration that the majority of bar mater...")
23:59, 12 December 2023 Makerspace talk contribs created page AXYZ Innovator (Created page with "Category:Equipment Category:CNC Machinery Category:Router {{RestrictedMachine}} This machine is excellent for all sheet-format wood work. It uses a rotary cutting tool like an endmill or a drill to cut into sheet material like plywood, MDF, chipboard etc. This material is held to the bed using a powerful vacuum pump.")
23:48, 12 December 2023 Makerspace talk contribs moved page Power Up & Power Down (Haas UMC-500) to Power Up and Power Down (Haas UMC-500) without leaving a redirect (Misspelled title)
23:43, 12 December 2023 Makerspace talk contribs deleted page Tlx (content was: "#REDIRECT Template:Template link expanded {{Redirect category shell| {{R from move}} }}")
23:43, 12 December 2023 Makerspace talk contribs deleted page Tl (content was: "#REDIRECT Template:Template link {{Redirect category shell| {{R from move}} }}")
23:43, 12 December 2023 Makerspace talk contribs deleted page Yesno-no (content was: "{{safesubst:<noinclude />yesno|{{{1}}}|yes={{{yes|yes}}}|no={{{no|no}}}|blank={{{blank|no}}}|¬={{{¬|no}}}|def={{{def|no}}}}}<noinclude> {{Documentation|Template:Yesno/doc}}  </noinclude>")
23:43, 12 December 2023 Makerspace talk contribs deleted page Yesno (content was: "{{<includeonly>safesubst:</includeonly>#switch: {{<includeonly>safesubst:</includeonly>lc: {{{1|¬}}} }} |no |n |f |false |off |0 = {{{no|}}} | = {{{blank|{{{no|}}}}}} |¬ = {{{¬|}}} |yes |y |t |true |on |1 = {{{yes|yes}}} |#default = {{{def|{{{yes|yes}}}}}} }}<noinclude> {{Documentation}} </noinclude>")
23:42, 12 December 2023 Makerspace talk contribs deleted page View (content was: "{{#invoke:navbar|navbar|plain = 1|template = {{{template|{{{1|}}}}}}}}<noinclude> {{Documentation|Template:Navbar/doc}} </noinclude>")
23:42, 12 December 2023 Makerspace talk contribs deleted page Underlinked (content was: "{{ safesubst:<noinclude/>#invoke:Unsubst||date=__DATE__ |$B= {{Ambox | name = Underlinked | type = style | image = 50x40px|link=|alt= | issue = This {{{1|article}}} '''needs more links to other articles to help integrate it into the encyclopedia'''. | fix = Please help [{{fullurl:{{FULLPAGENAME}}|action=edit}} improve this article] by...")
23:42, 12 December 2023 Makerspace talk contribs deleted page Template:Template link expanded (content was: "{{#Invoke:Template link general|main|code=on}}<noinclude> {{Documentation|1=Template:Tlg/doc |content = {{tlg/doc|tlx}} }}  </noinclude>")
23:42, 12 December 2023 Makerspace talk contribs deleted page Tlg (content was: "#REDIRECT Template:Template link general {{Redirect category shell| {{R from move}} }}")
23:42, 12 December 2023 Makerspace talk contribs deleted page Tla (content was: "#REDIRECT Template:Template link with alternate text {{Redirect category shell| {{R from move}} }}")
23:42, 12 December 2023 Makerspace talk contribs deleted page Template:Template link (content was: "{{[[Template:{{{1}}}|{{{1}}}]]}}<noinclude>{{documentation}}  </noinclude>")
23:42, 12 December 2023 Makerspace talk contribs deleted page Template parameter usage (content was: "{{#switch:{{{label|}}} |=[https://bambots.brucemyers.com/TemplateParam.php?wiki=enwiki&template={{Urlencode:{{#if:{{{1|}}}|{{ROOTPAGENAME:{{{1|}}}}}|{{ROOTPAGENAME}}}}}} {{#ifeq:{{yesno-no|{{{lc}}}}}|no|S|s}}ee a monthly parameter usage report] for {{#if:{{{1|}}}|[[Template:{{ROOTPAGENAME:{{{1|}}}}}]]|this template}} in articles{{#ifeq:{{yesno-no|{{{based}}}}}|yes| based on {{#if:{{{1|}}}|its|this}} TemplateData}}. |None|none=[https://bambots.brucemyers.com/TemplateParam....")
23:42, 12 December 2023 Makerspace talk contribs deleted page Template other (content was: "{{#switch:  {{#if:{{{demospace|}}} | {{lc: {{{demospace}}} }}  | {{#ifeq:{{NAMESPACE}}|{{ns:Template}} | template | other }} }} | template = {{{1|}}} | other | #default = {{{2|}}} }}<noinclude> {{documentation}}  </noinclude>")
23:42, 12 December 2023 Makerspace talk contribs deleted page Template link with alternate text (content was: "{{Tlg|subst={{{subst|}}}|nowrap={{{nowrap|}}}|{{{1|}}}|alttext{{#ifeq:{{{2}}}|{{{2|x}}}||x}}={{{2}}}|3{{#ifeq:{{{3}}}|{{{3|x}}}||x}}={{{3}}}|4{{#ifeq:{{{4}}}|{{{4|x}}}||x}}={{{4}}}|5{{#ifeq:{{{5}}}|{{{5|x}}}||x}}={{{5}}}|6{{#ifeq:{{{6}}}|{{{6|x}}}||x}}={{{6}}}|7{{#ifeq:{{{7}}}|{{{7|x}}}||x}}={{{7}}}|8{{#ifeq:{{{8}}}|{{{8|x}}}||x}}={{{8}}}|9{{#ifeq:{{{9}}}|{{{9|x}}}||x}}={{{9}}}|10{{#ifeq:{{{10}}}|{{{10|x}}}...")
23:42, 12 December 2023 Makerspace talk contribs deleted page Template link general (content was: "{{{{{|safesubst:}}}#Invoke:Template link general|main}}<noinclude> {{Documentation}} </noinclude>")
23:41, 12 December 2023 Makerspace talk contribs deleted page Template link expanded (content was: "{{#Invoke:Template link general|main|code=on}}<noinclude> {{Documentation|1=Template:Tlg/doc |content = {{tlg/doc|tlx}} }}  </noinclude>")
23:41, 12 December 2023 Makerspace talk contribs deleted page Template link (content was: "{{[[Template:{{{1}}}|{{{1}}}]]}}<noinclude>{{documentation}}  </noinclude>")