640
edits
Haas WIPS Probe: Difference between revisions
no edit summary
Makerspace (talk | contribs) (Created page with "Category:Mill == Introduction == The WIPS Work Probe, or Renishaw Probe, is used to located work offsets and automatically probe feature geometry. In conjuction with Fusion 360 it can be used as part of an in-process inspection routine. It runs on batteries and uses infrared light to communicate with the CNC controller. This tool is fragile, and is a piece of precision equipment. Special care must be taken to ensure that the probe body (which unlike the sensing tip...") |
No edit summary |
||
| Line 18: | Line 18: | ||
When changing the batteries you must be very careful to not move the probe stem during the 30 seconds or so after the batteries have been inserted. Doing so may change the settings on the probe and cause it to stop working. | When changing the batteries you must be very careful to not move the probe stem during the 30 seconds or so after the batteries have been inserted. Doing so may change the settings on the probe and cause it to stop working. | ||
Replacement batteries are available from RS | * Replacement batteries are available from [https://uk.rs-online.com/web/p/speciality-size-batteries/1835714?searchId=462d5334-8e97-4083-b598-0cd4875e97ac&gb=s RS - 183-5714]. | ||