Epilog Zing 16: Difference between revisions

Epilog Zing 16 (view source)

912 bytes added , 18 December 2023

no edit summary

640

edits

@@ Line 8: / Line 8: @@
 }}
-The Epilog Zing 16 is a smaller form factor CO2 laser cutter. If you are working on a lot of smaller parts it may be preferable to use this machine to keep the larger machines free.
+The Epilog Zing 16 is a smaller form factor CO<sub>2</sub> laser cutter. If you are working on a lot of smaller parts it may be preferable to use this machine to keep the larger machines free.
+== Connecting to the Laser ==
+This laser cutter is an older model that can only communicate over USB. To use it you must use the PC which is directly next to the PC, on the right hand side as you look at the machine. The appropriate PC has a "Epilog Zing" label stuck onto the monitor.
+* Open '''Epilog Job Manager''' from the Start Menu or the Desktop.
+* Click the '''Add Laser System''' button - this may be a large button with text in the centre of the screen or a small plus icon in the top right of the screen.
+* Click '''Add Manually'''
+* For the '''System Series''' select '''Other''' then choose '''Zing''' from the dropdown menu.
+* The model is '''Zing 16'''.
+* The CO<sub>2</sub> laser installed is '''30 watts'''.
+* When you are asked for the IP address, select '''Choose the Print Driver instead'''.
+* From the Print Driver dropdown list select Epilog Zing Print Driver (Windows)
 [[Category:Laser Cutter]]
 [[Category:Equipment]]