640
edits
Tailstock (Haas ST-15Y): Difference between revisions
no edit summary
(Created page with "In order to support long material the lathe has a hybrid hydraulic-manual tailstock. This tailstock can hold tools with an MT3 taper, such as a live centre. Always remove tools from the tailstock to reduce the risk of collisions with the tool turret. == Inserting tools into the tailstock taper == It is crucially important that the taper of the tool and the taper in the ram of the tailstock is impeccably clean. An...") |
No edit summary |
||
| Line 49: | Line 49: | ||
Be careful when setting this value - too high can bend parts, too low can result in sub-optimal clamping. You may wish to use a dial indicator to assess the amount of deflection you are causing. | Be careful when setting this value - too high can bend parts, too low can result in sub-optimal clamping. You may wish to use a dial indicator to assess the amount of deflection you are causing. | ||
If the gauges read zero the machine is either asleep or in an alarm state. Press the Reset button to wake the machine up or clear the error. | If the gauges read zero the machine is either asleep or in an alarm state. Press the Reset button on the control panel to wake the machine up or clear the error. | ||
== More Information == | == More Information == | ||