Function Codes (AXYZ Innovator)
To perform certain common operations the CNC router uses function codes - F13 will move the spindle to the current origin point, for example. Often you can pass a variable to the function code, such as picking up a particular tool - F31.1 - or the function will ask further questions once it has loaded.
General Functions
| Code | Description | Example |
| F 1 | Machine Information | |
| F 9 | Delete/Abort Jobs |
X/Y Co-ordinate Functions
| Code | Description | Example |
| F 10 | Set new user origin (G55)
Move to a new position then F10, Enter. |
|
| F 11.nn | Change current work co-ordinate system. | F 11.56 - change to WCS G56. |
| F 13 | Move to current origin | |
| F 16 | Enable parking mode |
Z Co-ordinate Functions
| Code | Description | Example |
| F 24 | Manual tool height measure (for large diameter tools) | |
| F 25.n | Automatic tool height measure | F25.2 - auto measure the height of tool 2. |
| F 26 | Automatically measure all tools in the ATC. | |
| F 28.1 | Set wasteboard height | F28.1, then jog to wasteboard, press enter. |
| F 28.2 | Plane wasteboard |
ATC/Spindle Functions
| Code | Description | Example |
| F 31.n | Pickup tool from ATC | F31.1 - Pickup tool 1 |
| F 32 | Open ATC cover and pop up tools | |
| F 34 | Deposit tool in spindle into ATC | |
| F 39 | Warmup Spindle |
Miscellaneous Functions
| Code | Description | Example |
| F 40 | Job Timer | |
| F 42 | Rotate Knife (N/A) | Not application with our machine (no rotary knife attachment) |
| F 46 | Measured move |