Make In Salford

Roland GS-24

Revision as of 09:46, 13 December 2023 by Makerspace (talk | contribs) (Created page with "{{Stub}} This vinyl cutter takes illustrations from Adobe Illustrator and cuts them into adhesive backed vinyl with a sharp blade. == Troubleshooting == Sometimes the print driver that communicates with the vinyl cutter doesn't properly send straight lines for cutting. To resolve this issue rotate your illustration a small amount (0.5 degrees seems to work fine) and re-send the job.")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


This vinyl cutter takes illustrations from Adobe Illustrator and cuts them into adhesive backed vinyl with a sharp blade.

Troubleshooting

Sometimes the print driver that communicates with the vinyl cutter doesn't properly send straight lines for cutting. To resolve this issue rotate your illustration a small amount (0.5 degrees seems to work fine) and re-send the job.

Retrieved from "https://www.makeinsalford.com/wiki/index.php?title=Roland_GS-24&oldid=417"