Haas ST-15Y

This is a restricted use machine. You must be specifically trained before using this equipment. Review the self-directed learning information on this page and book in for in-person training with a member of technical staff.

In a lathe the material of the workpiece spins and the tool remains stationary - a piece of sintered tungsten carbide is then used to peel away material where it isn't wanted. If you need to produce parts which are primarily round this is the machine you should probably be using. This particular machine has a Y axis and live tooling capability which expands the possibilities even more by allowing work to take place off the spindle axis, and perpendicular to it as well.

C-axis live tool CNC lathe.
Equipment Information
Status	Unknown
Manufacturer	Haas
Model	ST-15Y
Working Area	{{{workingarea}}}
Maker Space Information
Training Required	Yes
Training Information	Here

Actually programming the machine is relatively easy using Fusion 360. We have a number of programming templates in the works which will automate the majority of the process. The (slight) difficulty is in the form of loading the tools in a manner that allows access to all of the work area without colliding with the chuck or another part of the machine enclosure.