Epilog Fusion Edge 36
|
This is a restricted use machine. You must be specifically trained before using this equipment. Review the self-directed learning information on this page and book in for in-person training with a member of technical staff. |
Our Epilog Fusion Edge 36 is one of our four laser cutters. It has a 60 watt CO2 laser tube, and can accomodate sheet material up to 900 mm x 600 mm.
| A 60 watt CO2 laser located in the laser cutting area of the Maker Space. | |
| Equipment Information | |
|---|---|
| Status | Unknown |
| Manufacturer | Epilog |
| Model | Fusion Edge 36 |
| Working Area | 900 mm x 600 mm |
| Maker Space Information | |
| Training Required | Yes |
| Training Information | Here |
CO2 lasers emit laser light in the infrared spectrum - it is invisible to the naked eye. This wavelength of light is suitable for cutting through organic materials that burn easily such as plywood, MDF, and acrylic.
Safety
- Review the Safe System of Work document before starting work.
- You must stay with the laser cutter at all times when it is cutting or engraving. There is a high risk of fire, therefore the process must be monitored. If you need to leave the laser you must pause the job.
- You must turn on the fume extraction before you start cutting. The fumes produced by laser cutting are hazardous, and the smoke produced will set off the building's fire alarm.
- Check the approved materials list before cutting. Some materials are unsafe to cut because of hazardous fumes or combustion byproducts. You must never cut PVC.
Usage Instructions
Connecting to the laser cutter
Follow these instructions to set up the Fusion Edge 36 on your PC.
Laser Cutter Quick Start Guide
Learn how to prepare your files for use with the laser cutter.
Starting and running a job on the laser cutter
Need a reminder on how to run a job? Just follow the steps here. This guide is for the Fusion Pro 48, but the user interface is exactly the same.