All public logs

Combined display of all available logs of Make In Salford. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

16:38, 15 December 2023 A.Dunbar talk contribs created page Template:SafetyInfoMissing (Created page with "Category:Safety Information Missing {{fmbox | type = warning | text = This machine or process is missing safety information. Please make sure you check the rick assessments and datasheets in person - ask a member of technical staff if you are unsure. }}")
16:26, 15 December 2023 A.Dunbar talk contribs created page File:Partial-vs-full-threading-inserts.png
16:26, 15 December 2023 A.Dunbar talk contribs uploaded File:Partial-vs-full-threading-inserts.png
14:58, 15 December 2023 A.Dunbar talk contribs created page Threading (Haas ST-15Y) (Created page with "== OD Threads with a partial-form threading insert == A partial form threading insert has a sharp point to it - much sharper than the radiused base of a full-form threading insert. Because of this extra care must be taken to ensure the thread is cut to proper depth. For a longer production run of parts where the thread form has to be perfect it is recommended that you use a full profile threading insert. If you are trying to cut a thread and it just seems like it isn't...") Tag: Visual edit
14:56, 15 December 2023 A.Dunbar talk contribs created page File:Thread-form-diagram.png
14:56, 15 December 2023 A.Dunbar talk contribs uploaded File:Thread-form-diagram.png
14:48, 15 December 2023 A.Dunbar talk contribs created page Troubleshooting (Haas ST-15Y) (Created page with "== Program/CAM Problems == thumb|250x250px|Live Tool checkbox in the Post Processor tab of the tool editor. === When I start drilling a hole the live tooling motor turns on and the main spindle doesn't turn. === Don't try to drill with a static tool and a static spindle - it won't work! You have the "Live Tool" option selected in the Post Processor tab of the tool you are trying to drill with. Uncheck this box to use the main spin...") Tag: Visual edit
14:47, 15 December 2023 A.Dunbar talk contribs created page File:F360-live-tool-checkbox.png
14:47, 15 December 2023 A.Dunbar talk contribs uploaded File:F360-live-tool-checkbox.png
12:39, 15 December 2023 A.Dunbar talk contribs created page Tool Library (Haas ST-15Y) (Created page with "{{Stub}} == Tool 9999 == Tools which do not typically live in the lathe are referred to in the Fusion 360 Tool Library as tool number 9999. You must load the tools into the machine in slots which make sense and will not cause a collision or crash. Update the tool number in Fusion 360 by right clicking on an operation which uses the tool, selecting "Edit Tool" and then change the tool number in the Post Processor tab. If you forget to update this value the post process...") Tag: Visual edit
17:05, 14 December 2023 Makerspace talk contribs created page File:Nesting 2.png
17:05, 14 December 2023 Makerspace talk contribs uploaded File:Nesting 2.png
17:05, 14 December 2023 Makerspace talk contribs created page File:Nesting 1.png
17:05, 14 December 2023 Makerspace talk contribs uploaded File:Nesting 1.png
16:55, 14 December 2023 Makerspace talk contribs created page Material Nesting (Created page with "{{Stub}} All sheet-based material processes like waterjet cutting, CNC routing, and laser cutting benefit from efficient material use through effective nesting. == Cost of Materials == === Financial cost === The Maker Space aims to provide free materials (where reasonable!) for staff and students at the University so there are no barriers to learning. Excessive material waste is not acceptable though - you should treat the material as if you had bought it with your ow...") Tag: Visual edit
16:29, 14 December 2023 Makerspace talk contribs created page File:Mayku-Multiplier-Machinery-Manual.pdf
16:29, 14 December 2023 Makerspace talk contribs uploaded File:Mayku-Multiplier-Machinery-Manual.pdf
11:19, 14 December 2023 User account G.Dodgson talk contribs was created by Makerspace talk contribs and password was sent by email (Account for staff)
11:16, 14 December 2023 Makerspace talk contribs created page Style Guide (Created page with "This is a guide to how pages on the wiki should be created and written, in order to keep things consistent. == Page Names & Titles == * Page names and titles, when relating to equipment, includes only the equipment name and model number not the particular type of equipment it is. An exception to this would be if this is included in the manufacturer's model name. ** "Haas UMC-500" ''not'' "Haas UMC-500 5-axis CNC Mill" ** "Bambu Lab X1E" ''not'' "Bambu Lab X1E...") Tag: Visual edit
10:32, 14 December 2023 Makerspace talk contribs created page File:Roland-gs-24.jpg
10:32, 14 December 2023 Makerspace talk contribs uploaded File:Roland-gs-24.jpg
10:32, 14 December 2023 Makerspace talk contribs created page File:Prusa-i3-mk3.jpg
10:32, 14 December 2023 Makerspace talk contribs uploaded File:Prusa-i3-mk3.jpg
10:32, 14 December 2023 Makerspace talk contribs created page File:Mayku-multiplier.jpg
10:32, 14 December 2023 Makerspace talk contribs uploaded File:Mayku-multiplier.jpg
10:32, 14 December 2023 Makerspace talk contribs created page File:Gravograph-ls900.jpg
10:32, 14 December 2023 Makerspace talk contribs uploaded File:Gravograph-ls900.jpg
10:32, 14 December 2023 Makerspace talk contribs created page File:Formlabs-fuse-1.jpg
10:32, 14 December 2023 Makerspace talk contribs uploaded File:Formlabs-fuse-1.jpg
10:32, 14 December 2023 Makerspace talk contribs created page File:Epilog-zing-16.jpg
10:32, 14 December 2023 Makerspace talk contribs uploaded File:Epilog-zing-16.jpg
10:31, 14 December 2023 Makerspace talk contribs created page File:Epilog-fusion-edge.jpg
10:31, 14 December 2023 Makerspace talk contribs uploaded File:Epilog-fusion-edge.jpg
10:31, 14 December 2023 Makerspace talk contribs created page File:Bambu-x1e.jpg
10:31, 14 December 2023 Makerspace talk contribs uploaded File:Bambu-x1e.jpg
10:31, 14 December 2023 Makerspace talk contribs created page File:Anycubic-wash-&-cure-3.jpg
10:31, 14 December 2023 Makerspace talk contribs uploaded File:Anycubic-wash-&-cure-3.jpg
10:31, 14 December 2023 Makerspace talk contribs created page File:Anycubic-photon-mono-m5s.jpg
10:31, 14 December 2023 Makerspace talk contribs uploaded File:Anycubic-photon-mono-m5s.jpg
14:30, 13 December 2023 Makerspace talk contribs created page Category:3D Printing (Created blank page) Tag: Visual edit: Switched
12:41, 13 December 2023 Makerspace talk contribs created page Category:Stub (Created blank page) Tag: Visual edit: Switched
12:39, 13 December 2023 Makerspace talk contribs created page Vevor Ultrasonic Cleaner (Created page with "{{Stub}} This cleaner uses powerful ultrasonic waves to clean components. There is a built in heater unit, and a drain tap. == Cleaning fluid == It is often not economical to fill the entire ultrasonic cleaner with specialist cleaning fluids. Instead, fill the bath with water and use a glass jar to hold the parts you wish to clean in the specialist fluid. Category:Equipment") Tag: Visual edit
12:37, 13 December 2023 Makerspace talk contribs created page Axminster G700 Dust Processor (Created page with "{{Stub}} This dust extractor is used for both the AXYZ Innovator CNC router and the sandblasting cabinet. It is turned on using the green "RUN" button on the front panel. The collection bags must be emptied regularly. The fine dust collected may be hazardous - make sure you are wearing a dust mask when emptying the collection bins. Category:Equipment Category:Dust Extraction") Tag: Visual edit
12:35, 13 December 2023 Makerspace talk contribs created page Sandblasting Cabinet (Created page with "{{Stub}} The sandblasting cabinet can be used to remove paint, clean parts, and impart a uniform matte finish to components. Parts to be sandblasted to not necessarily need to be metal or machined - it works nicely on SLS nylon parts as well. == Blasting media == Despite the name, sand is not used as a blasting media due to the risk of silicosis. Instead, we use the same 80-grit garnet that is used in the waterjet. Category:Equipment Categor...") Tag: Visual edit
12:32, 13 December 2023 Makerspace talk contribs created page Frost Vibratory Tumbler (Created page with "{{Stub}} A vibratory tumbler uses specialist abrasive media to automatically deburr and soften the edges of machined components. There are a number of different types of media kept in stock. The machine must be cleaned thoroughly between uses to prevent cross contamination of media and material. Category:Metalworking Category:Equipment") Tag: Visual edit
12:30, 13 December 2023 Makerspace talk contribs created page Plymovent MonoGo (Created page with "{{Stub}} This fume extractor is used to extract fumes from the welding area in the Morson Engine Room. It must be used when you are welding with the TIG welder. Category:Equipment Category:Welding Category:Fume Extraction") Tag: Visual edit
12:29, 13 December 2023 Makerspace talk contribs created page Inelco Neutrix Tungsten Grinder (Created page with "{{Stub}} This specialised grinder is for sharpening tungsten electrodes for use in TIG welding. It uses a diamond wheel to grind a specific angle point onto the electrodes. Category:Equipment Category:Welding") Tag: Visual edit
12:28, 13 December 2023 Makerspace talk contribs created page Lincoln Aspect 200 (Created page with "{{Stub}} This TIG welder is capable of supplying up to 200 amps of welding current, and can weld in both AC and DC modes. It is capable of also working as a stick/arc welder but the welding space in the Morson Engine Room is not suited for this process. == Welding current == The torch currently attached to the machine will not cope with the full 200A of current for very long - it's rated up to a maximum of 100A continuous use. If you need to use the higher current cap...") Tag: Visual edit
12:25, 13 December 2023 Makerspace talk contribs created page Axminster AT540PD (Created page with "{{Stub}} The pillar drill is located in the Morson Engine Room. Category:Equipment Category:Metalworking Category:Manual Tools") Tag: Visual edit
12:24, 13 December 2023 Makerspace talk contribs created page 3-in-1 Metalworker (Created page with "{{Stub}} This manually operated combination bender, roller and guillotine has no maker's mark. We inherited it from the Arts & Media workshop. Category:Equipment Category:Metalworking Category:Manual Tools") Tag: Visual edit