Main Page
The Maker Space is an open access workshop space available for staff and students at the University of Salford.
Quick Start Guides
 If you want to get started without much hand-holding you can follow this guide to 3D printing on our machines. |
 You need safety instruction before you can use the laser cutter independently, but you can get a head start by getting your files ready. Experienced users can use this as a reference. |
CNC Machines
 |
 |
 |
| OMAX Maxiem 1515 Waterjet Cutter |  |
Workshop Equipment
 |
Axminster AT540PD Pillar Drill | 3-in-1 Metalworker |
| Lincoln Aspect 200 TIG Welder | Sandblasting Cabinet | Vibratory Tumbler |
| Ultrasonic Cleaner |
Electronics & Inspection
| Nikon Altera 10108 Coordinate Measurement Machine | Zeiss Smartzoom 5 Digital Microscope | Zeiss Axio Zoom V16 Optical Microscope |
| Rigol DP832 Electronic Power Supply | Rigol DS1074 Digital Oscilloscope |
Wiki Development
This wiki was started in late December 2023 and is currently under active development. You can use it to find out more about some of our equipment, such as our CNC machines, or the materials available for processes like laser cutting or 3D printing.
In the coming days and weeks Health & Safety information including risk assessments and COSHH datasheets will start to become available. These are for use by staff and students at the University of Salford, although outside users are welcome to take a look.
You can see all the pages currently available on the wiki here. Pages which are placeholders/stubs and which need expansion can be found here.