All public logs
Combined display of all available logs of Make In Salford. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Template link with link off by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Tlf by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Hlist/styles.css by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Nobold/styles.css by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Nobold by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Parameter names example by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:High-use by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Distinguish by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Documentation subpage by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Module:TableTools by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Module:List by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Module:Lua banner by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Lua by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Yesno-no by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Template parameter usage by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Module:High-use by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Module:String by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Module:Documentation/styles.css by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Module:Documentation/config by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Module:Documentation by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Yesno by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Main other by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Module:Check for unknown parameters by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Module:Sidebar/configuration by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Module:Sidebar by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Module:Distinguish by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Module:Template link general by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Module:Infobox by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Documentation by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Template other by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:Infobox by file upload (1 revision)
- 20:29, 12 December 2023 Makerspace talk contribs imported Template:InfoboxEquipment by file upload (1 revision)
- 20:27, 12 December 2023 Makerspace talk contribs created page Category:Laser Cutter (Created blank page)
- 20:27, 12 December 2023 Makerspace talk contribs created page Approved Laser Cutter Materials (Created page with "== Plastics == === Acrylic === [https://hobarts.com/pages/acrylic Hobarts] Acrylic is generally considered safe for laser cutting. Cast acrylic is generally a nicer material to work with compared to extruded, but it has poorer dimensional/thickness tolerance. Wherever possible we purchase recycled acrylic. Please place any unusable offcuts into the acrylic recycling bin. === Engraving Laminate === [https://hobarts.com/collections/laminate Hobarts] This material...")
- 20:26, 12 December 2023 Makerspace talk contribs created page SSW - Epilog Fusion Pro 48 Laser Cutter (Created page with "This document relates specifically to the Epilog Fusion Pro 48 but the general principles apply to the other laser cutters in the Maker Space. == Personal Protective Equipment == No specific PPE is required to use this equipment. == Specific risks you should be aware of == {{PictogramExplanation|hazard-flammable|Fire Hazard|Material may catch alight during engraving and cutting. }} {{PictogramExplanation|hazard-optical-radiation|Optical Radiation|...")
- 20:26, 12 December 2023 Makerspace talk contribs created page Epilog Fusion Pro 48 (Created page with "Category:Laser Cutter {{TrainingAvailableMachine}} {{InfoboxEquipment | description = A 120 watt CO2 laser located in the laser cutting area of the Maker Space. | manufacturer = Epilog | model = Fusion Pro 48 | workingarea = 1200 mm x 900 mm | image = Epilog-fusion-pro-48.jpg }} Our Epilog Fusion Pro 48 is the largest of our four laser cutters. It has a 120 watt CO2 laser tube, and can accomodate sheet material up to 1200 mm x 900 mm. CO2 lasers emit laser light in...")
- 20:25, 12 December 2023 Makerspace talk contribs created page Category:Equipment (Created blank page)
- 20:25, 12 December 2023 Makerspace talk contribs created page Category:CNC Machinery (Created blank page)
- 20:25, 12 December 2023 Makerspace talk contribs created page Category:Restricted Usage Equipment (Created blank page)
- 20:24, 12 December 2023 Makerspace talk contribs created page Category:Mill (Created blank page)
- 20:24, 12 December 2023 Makerspace talk contribs created page Toolholders (Haas UMC-500) (Created page with "We have standardised on ER16 and ER25 collet chuck tool holders, with a gauge length (the distance from the spindle face to the face of the collet nut) of 100 mm. The spindle taper is BT40. There are some additional "special use" tool holders which are different, but the majority are the collet type. Additional toolholders can be ordered from Cutwel: [https://www.cutwel.co.uk/catalog/product/view/id/78089/s/bt40-er16-collet-chuck-100mm-gauge-length-15-000rpm-g6-3-cutwe...")
- 20:23, 12 December 2023 Makerspace talk contribs created page Workholding (Haas UMC-500) (Created page with "All of the work-holding systems shown in this Wiki have corresponding template files available to download in the Files section of this Teams channel. See each section below for a link to a video showing how to set them up for use, and some examples of how they have been used in the past. If there is something missing, or you need some help with a workholding solution you can ask the Maker Space technical staff - there are countless ways to hold onto material so we can...")
- 20:23, 12 December 2023 Makerspace talk contribs created page Training (Haas UMC-500) (Created page with "We are creating a short series of self-directed CAM workshops that teach you how to program some simple parts ready for machining. The first workshops will cover setting up jobs for the Haas UMC-500 CNC mill. It's expected you'll be comfortable using basic Fusion 360 commands - you can open and save files, move parts around and are familiar with the concept of "components" and using the browser tree. For people familiar with Solidworks it is possible to change the mouse...")
- 20:22, 12 December 2023 Makerspace talk contribs created page Power Up & Power Down (Haas UMC-500) (Created page with "== Turning the machine on == * Remove any vice handles or loose parallels from the machine before running the startup process. * Press the green '''Power On''' button. Follow the instructions that appear on the screen. == Warming up the machine == You must warm up the spindle before use. This will take about 20 minutes, and gives you plenty of time to prepare your raw material for cutting. The warm up process ensure the bearings are warm and coated in oil before they a...")
- 20:20, 12 December 2023 Makerspace talk contribs created page File:Rocklock-base.jpg
- 20:20, 12 December 2023 Makerspace talk contribs uploaded File:Rocklock-base.jpg
- 20:16, 12 December 2023 Makerspace talk contribs created page Category:Equipment with additional training available (Created blank page) Tag: Visual edit: Switched
- 20:16, 12 December 2023 Makerspace talk contribs created page Template:TrainingAvailableMachine (Created page with "Category:Equipment with additional training available {{Fmbox | type = information | text = '''Specialist training is available for this equipment.'''<br />You are welcome to review the training material below and use this equipment independently, but pay close attention to the safety notices. Ask a member of technical staff about training if you feel you need one-to-one instruction. }}")
- 20:15, 12 December 2023 Makerspace talk contribs imported Template:Pp by file upload (1 revision)
- 20:14, 12 December 2023 Makerspace talk contribs imported Module:Message box/ambox.css by file upload (1 revision)
