Troubleshooting (AXYZ Innovator): Difference between revisions
(Created page with "== Machine Problems == === The machine won't start up - it complains about a missing operating system? === The firmware on the machine controller will try to load new software from any USB stick which is inserted into the machine at start up. * Turn off the machine with the '''POWER OFF''' button. * Unplug the USB drive from the USB socket on the side of the machine electrical cabinet. * Wait at least 30 seconds. * Press the '''POWER ON''' button. * Continue Pow...") |
No edit summary |
||
| Line 21: | Line 21: | ||
[[Category:CNC Router]] | [[Category:CNC Router]] | ||
[[Category:Fusion 360]] | [[Category:Fusion 360]] | ||
[[Category:Troubleshooting]] | |||
Revision as of 12:10, 4 January 2024
Machine Problems
The machine won't start up - it complains about a missing operating system?
The firmware on the machine controller will try to load new software from any USB stick which is inserted into the machine at start up.
- Turn off the machine with the POWER OFF button.
- Unplug the USB drive from the USB socket on the side of the machine electrical cabinet.
- Wait at least 30 seconds.
- Press the POWER ON button.
- Continue the startup procedure as normal.
Program/CAM Problems
Y-axis offset too small
This is an intermittent problem which only occurs for certain machine users. There can be a number of causes - it's tricky because sometimes a file which is exactly just exported at a different time will work perfectly fine. Ask a member of technical staff for help, but this is what we will recommend you try:
- Post each operation as a separate file, and run these files separately.
- Move the work away from the edge of your material slightly.
- Move the lead-in linking position away from the origin position.