Build Volume (3D Printing): Difference between revisions
(Created page with "We have a range of 3D printers with differing build volumes - if you have a small model pretty much any of the printers will work, but if you have a larger model then you might be restricted to a few machines - unless you break it into multiple parts. == FDM/FFF Process Printers == {| class="wikitable sortable" |+All units in millimetres. !Make !Model !Build Plate Size !Max. Print Height |- |Ultimaker |2+ |223 x 223 |205 |- |Ultimaker |Ultimaker 2+|2...") |
|||
| Line 20: | Line 20: | ||
|- | |- | ||
|Ultimaker | |Ultimaker | ||
|[[Ultimaker | |[[Ultimaker 3 Extended|3 Extended]] | ||
| | |215 x 215 | ||
|300 | |300 | ||
|- | |- | ||
|Ultimaker | |Ultimaker | ||
|[[Ultimaker | |[[Ultimaker S5|S5]] | ||
| | |330 x 240 | ||
|300 | |300 | ||
|- | |- | ||
| Line 33: | Line 33: | ||
|256 x 256 | |256 x 256 | ||
|256 | |256 | ||
|- | |||
|Markforged | |||
|Mark 2 | |||
|320 x 132 | |||
|154 | |||
|- | |||
|Markforged | |||
|Metal X | |||
|300 x 220 | |||
|180 | |||
|- | |||
|Prusa | |||
|[[Prusa i3 Mk3|i3 Mk3]] | |||
|210 x 250 | |||
|210 | |||
|} | |} | ||
[[Category:3D Printing]] | [[Category:3D Printing]] | ||
Revision as of 15:26, 2 January 2024
We have a range of 3D printers with differing build volumes - if you have a small model pretty much any of the printers will work, but if you have a larger model then you might be restricted to a few machines - unless you break it into multiple parts.
FDM/FFF Process Printers
| Make | Model | Build Plate Size | Max. Print Height |
|---|---|---|---|
| Ultimaker | 2+ | 223 x 223 | 205 |
| Ultimaker | 2+ Extended | 223 x 223 | 305 |
| Ultimaker | 3 Extended | 215 x 215 | 300 |
| Ultimaker | S5 | 330 x 240 | 300 |
| Bambu Lab | X1E | 256 x 256 | 256 |
| Markforged | Mark 2 | 320 x 132 | 154 |
| Markforged | Metal X | 300 x 220 | 180 |
| Prusa | i3 Mk3 | 210 x 250 | 210 |