AXYZ Innovator: Difference between revisions
(→Usage Information: Add probing tool length) |
(warming up the spindle) |
||
| Line 20: | Line 20: | ||
== Power Up and Power Down == | == Power Up and Power Down == | ||
[[Power Up and Power Down (AXYZ Innovator)]] | |||
=== [[Power Up and Power Down (AXYZ Innovator)]] === | |||
== Usage Information == | == Usage Information == | ||
=== [[ | === [[Warming up the spindle (AXYZ Innovator)|Warming up the spindle]] === | ||
The spindle must not be run cold - this will damage the bearings and reduce the lifespan of the spindle dramatically. If the spindle has been sat for more than two hours after it was turned on, please make sure you run the spindle warmup cycle. | |||
=== [[Probing tool length (AXYZ Innovator)|Probing Tool Length]] === | === [[Probing tool length (AXYZ Innovator)|Probing Tool Length]] === | ||
Each time you start up the machine you should check the tools in the pots and probe their tool length. Don't rely on the previous person setting up the machine properly. Thankfully, it's a quick 2 minute process to probe them all. | Each time you start up the machine you should check the tools in the pots and probe their tool length. Don't rely on the previous person setting up the machine properly. Thankfully, it's a quick 2 minute process to probe them all. | ||
=== [[Vacuum Bed and Wasteboard (AXYZ Innovator)|Vacuum Bed and Wasteboard]] === | |||
Material is not usually clamped or fixed down on this CNC router - instead it is sucked down through the MDF wasteboard/bed with a massive three-phase vacuum pump. Find out how to set vacuum bed zones and how to re-surface the wasteboard. | |||
=== [[Function Codes (AXYZ Innovator)|Function Codes]] === | === [[Function Codes (AXYZ Innovator)|Function Codes]] === | ||
Revision as of 10:50, 3 February 2025
|
This is a restricted use machine. You must be specifically trained before using this equipment. Review the self-directed learning information on this page and book in for in-person training with a member of technical staff. |
|
|
Missing Safety Information This machine or process is currently missing safety information. Please make sure you check the risk assessments and datasheets in person - ask a member of technical staff if you are unsure. |
 | |
| Flat bed CNC router | |
| Equipment Information | |
|---|---|
| Status | Unknown |
| Manufacturer | AXYZ |
| Model | Innovator |
| Working Area | 2400 mm x 1500 mm |
| Maker Space Information | |
| Training Required | Yes |
| Training Information | Here |
This machine is excellent for all sheet-format wood work. It uses a rotary cutting tool like an endmill or a drill to cut into sheet material like plywood, MDF, chipboard etc. This material is held to the bed using a powerful vacuum pump.
There are three dedicated tool pockets in the automatic tool changer, but it's possible to program more tools for manual tool changes.
Training
To book training on this machine please complete the training request form.
Programs for running the router are created within Fusion 360's Manufacturing workspace. If you are planning on using this machine it's recommended that you learn the basics of using the software before requesting training.
Power Up and Power Down
Power Up and Power Down (AXYZ Innovator)
Usage Information
Warming up the spindle
The spindle must not be run cold - this will damage the bearings and reduce the lifespan of the spindle dramatically. If the spindle has been sat for more than two hours after it was turned on, please make sure you run the spindle warmup cycle.
Probing Tool Length
Each time you start up the machine you should check the tools in the pots and probe their tool length. Don't rely on the previous person setting up the machine properly. Thankfully, it's a quick 2 minute process to probe them all.
Vacuum Bed and Wasteboard
Material is not usually clamped or fixed down on this CNC router - instead it is sucked down through the MDF wasteboard/bed with a massive three-phase vacuum pump. Find out how to set vacuum bed zones and how to re-surface the wasteboard.
Function Codes
To perform day-to-day operations on the router (such as changing and measuring tools) you will need to use function codes. This is a reference table covering all the function codes you should need.
Troubleshooting
A few issues crop up repeatedly. If you're having trouble with the router check this page to see if it's something we've come across before.