Haas ST-15Y: Difference between revisions
No edit summary |
|||
| Line 19: | Line 19: | ||
== Usage information == | == Usage information == | ||
=== [[Klamp DKF65A6|Workholding - Collets]] === | |||
The lathe usually has a collet chuck installed. This is an easy-to-use way to hold on to bar stock under 65mm in diameter. Check this page for how to change collets and order new sizes. | |||
=== [[Threading (Haas ST-15Y)|Threading]] === | === [[Threading (Haas ST-15Y)|Threading]] === | ||
Revision as of 17:10, 15 December 2023
|
This is a restricted use machine. You must be specifically trained before using this equipment. Review the self-directed learning information on this page and book in for in-person training with a member of technical staff. |
|
|
Missing Safety Information This machine or process is currently missing safety information. Please make sure you check the risk assessments and datasheets in person - ask a member of technical staff if you are unsure. |
 | This placeholder article needs more information adding to it. More details are coming soon, if you can please ask the technical staff for a wiki account and help out. |
 | |
| C-axis live tool CNC lathe. | |
| Equipment Information | |
|---|---|
| Status | Unknown |
| Manufacturer | Haas |
| Model | ST-15Y |
| Working Area | Ø240 mm x 400 mm |
| Maker Space Information | |
| Training Required | Yes |
| Training Information | Here |
In a lathe the material of the workpiece spins and the tool remains stationary - a piece of sintered tungsten carbide is then used to peel away material where it isn't wanted. If you need to produce parts which are primarily round this is the machine you should probably be using. This particular machine has a Y axis and live tooling capability which expands the possibilities even more by allowing work to take place off the spindle axis, and perpendicular to it as well.
Actually programming the machine is relatively easy using Fusion 360. We have a number of programming templates in the works which will automate the majority of the process. The (slight) difficulty is in the form of loading the tools in a manner that allows access to all of the work area without colliding with the chuck or another part of the machine enclosure.
Training
Ask a member of technical staff about training for this machine.
Usage information
Workholding - Collets
The lathe usually has a collet chuck installed. This is an easy-to-use way to hold on to bar stock under 65mm in diameter. Check this page for how to change collets and order new sizes.
Threading
Excellent quality threads can be made on the lathe, but it is a little involved compared to simply running a tap through a hole. This page will guide you through some of the maths requried to create excellent threads using single-point cutting tools.
Troubleshooting
A few issues crop up repeatedly. If you're having trouble with the lathe check this page to see if it's something we've come across before.