Warming up the spindle (AXYZ Innovator): Difference between revisions

From Make In Salford
(Created page with "The spindle of this machine is a high-speed variety and must be warmed up before starting work. A warmup cycle is prompted when the machine is turned on, but should be performed again if it has sat unused for more than an hour. == Running a manual spindle warmup cycle == * Remove any tool that's in the spindle either manually using the release button or using the tool change function codes. The warmup cycle should not be run with a tool in the spindle. * Clear the sa...")
 
No edit summary
Line 1: Line 1:
The spindle of this machine is a high-speed variety and must be warmed up before starting work. A warmup cycle is prompted when the machine is turned on, but should be performed again if it has sat unused for more than an hour.  
The spindle of this machine is a high-speed variety and must be warmed up before starting work. A warmup cycle is prompted when the machine is turned on, but should be performed again if it has sat unused for more than two hours.  


== Running a manual spindle warmup cycle ==
== Running a manual spindle warmup cycle ==

Revision as of 10:50, 3 February 2025

The spindle of this machine is a high-speed variety and must be warmed up before starting work. A warmup cycle is prompted when the machine is turned on, but should be performed again if it has sat unused for more than two hours.

Running a manual spindle warmup cycle

  • Remove any tool that's in the spindle either manually using the release button or using the tool change function codes. The warmup cycle should not be run with a tool in the spindle.
  • Clear the safety mat and turn the reset key.
  • Type F 39 and press Enter.
  • The spindle will now ramp up in speed over the course of 6 minutes.