Troubleshooting (Axminster AT540PD): Difference between revisions
(Created page with "== Power Issues == === The spindle won't turn on, but the light is on. === * Check the chuck guard is in the correct position. The guard should be covering the work area, rotated so that it is toward the front of the machine. * Check the emergency stop button on the front of the machine, just below the start/stop button. Twist in the direction of the arrows to release if it is pushed in. * Check the top cover is closed securely. There is a safety switch which prevent...") |
(No difference)
|
Revision as of 09:54, 12 January 2024
Power Issues
The spindle won't turn on, but the light is on.
- Check the chuck guard is in the correct position. The guard should be covering the work area, rotated so that it is toward the front of the machine.
- Check the emergency stop button on the front of the machine, just below the start/stop button. Twist in the direction of the arrows to release if it is pushed in.
- Check the top cover is closed securely. There is a safety switch which prevents the spindle motor from turning on when the cover is opened.