Tool Library (Haas ST-15Y): Difference between revisions
(Created page with "{{Stub}} == Tool 9999 == Tools which do not typically live in the lathe are referred to in the Fusion 360 Tool Library as tool number 9999. You must load the tools into the machine in slots which make sense and will not cause a collision or crash. Update the tool number in Fusion 360 by right clicking on an operation which uses the tool, selecting "Edit Tool" and then change the tool number in the Post Processor tab. If you forget to update this value the post process...") |
No edit summary |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Stub}} | {{Stub}} | ||
== Fusion 360 Tool Library == | |||
The standard tool libraries for the lathe are available on the [https://teams.microsoft.com/l/team/19%3a0SnJS2VK6JWarotGY8AKFWQmDBbTdMMpF9loQur2nQA1%40thread.tacv2/conversations?groupId=f31e29d4-08a6-4dfd-956e-37df24b824dc&tenantId=65b52940-f4b6-41bd-833d-3033ecbcf6e1 Microsoft Teams group], under the "CNC Machinery" channel. Look in the Files tab. | |||
Tool Libraries for the lathe are split into two groups - turning tools and drilling tools. | |||
=== Turning Tools === | |||
Pretty much any tool that is not a drill exists in this tool library. Everything from OD turning tools, grooving tools, boring bars, and threading tools. | |||
=== Drills === | |||
The majority of drills are numbered as tool 9999 - see below for what this means. Drill bits used on the lathe are often found in the "Lathe Drills" drawer next to the material rack. Don't get a fresh drill bit unless you can't find the size you need there. | |||
== Tool 9999 == | == Tool 9999 == | ||
| Line 7: | Line 18: | ||
Becuase tools are loaded into the machine manually there is no value in having tool numbers assigned specifically for each tool - the spot it occupies on the [[Automatic Tool Turret (Haas ST-15Y)|tool turret]] will vary depending on the job and the setup you are using. By having the tool number set to 9999 the post will remind you when you forget to update the tool number value, avoiding a potential crash. | Becuase tools are loaded into the machine manually there is no value in having tool numbers assigned specifically for each tool - the spot it occupies on the [[Automatic Tool Turret (Haas ST-15Y)|tool turret]] will vary depending on the job and the setup you are using. By having the tool number set to 9999 the post will remind you when you forget to update the tool number value, avoiding a potential crash. | ||
== More Information == | |||
* [https://testlivesalfordac.sharepoint.com/:f:/r/sites/MorsonMakerSpace/Shared%20Documents/CNC%20Machinery/Haas%20ST-15Y%20Lathe/Tool%20Libraries?csf=1&web=1&e=TUaAsY Tool Libraries folder on Sharepoint/Microsoft Teams] | |||
[[Category:Lathe]] | [[Category:Lathe]] | ||
[[Category:Metalworking]] | [[Category:Metalworking]] | ||
[[Category:CNC Machinery]] | [[Category:CNC Machinery]] | ||
[[Category:Fusion 360]] | [[Category:Fusion 360]] | ||
Latest revision as of 09:03, 11 January 2024
 | This placeholder article needs more information adding to it. More details are coming soon, if you can please ask the technical staff for a wiki account and help out. |
Fusion 360 Tool Library
The standard tool libraries for the lathe are available on the Microsoft Teams group, under the "CNC Machinery" channel. Look in the Files tab.
Tool Libraries for the lathe are split into two groups - turning tools and drilling tools.
Turning Tools
Pretty much any tool that is not a drill exists in this tool library. Everything from OD turning tools, grooving tools, boring bars, and threading tools.
Drills
The majority of drills are numbered as tool 9999 - see below for what this means. Drill bits used on the lathe are often found in the "Lathe Drills" drawer next to the material rack. Don't get a fresh drill bit unless you can't find the size you need there.
Tool 9999
Tools which do not typically live in the lathe are referred to in the Fusion 360 Tool Library as tool number 9999.
You must load the tools into the machine in slots which make sense and will not cause a collision or crash. Update the tool number in Fusion 360 by right clicking on an operation which uses the tool, selecting "Edit Tool" and then change the tool number in the Post Processor tab. If you forget to update this value the post processor will throw an error and not output valid code.
Becuase tools are loaded into the machine manually there is no value in having tool numbers assigned specifically for each tool - the spot it occupies on the tool turret will vary depending on the job and the setup you are using. By having the tool number set to 9999 the post will remind you when you forget to update the tool number value, avoiding a potential crash.