Changing tools (AXYZ Innovator): Difference between revisions
(Created page with "The AXYZ Innovator can automatically switch between three different tools, and also has the capability to use additional tools if they are swapped over by hand. == Picking up tools using the ATC == * Clear the safety mat and turn the '''SAFETY RESET''' key. * Type '''F 31.''n''''' and press '''Enter''', where '''''n''''' is the number of the tool you wish to pick up. For example, type F 31.1 to pick up the tool in ATC pocket one, F31.2 for pocket two, or F 31.3 for po...") |
No edit summary |
||
Line 11: | Line 11: | ||
* Type '''F 34''' and press '''Enter'''. | * Type '''F 34''' and press '''Enter'''. | ||
* The machine will deposit the tool currently in the spindle into the ATC holder. If it isn't from the ATC (i.e. the tool number is greater than 3) it will prompt you to remove the tool manually. | * The machine will deposit the tool currently in the spindle into the ATC holder. If it isn't from the ATC (i.e. the tool number is greater than 3) it will prompt you to remove the tool manually. | ||
[[Category:CNC Router]] | |||
[[Category:CNC Machinery]] |
Latest revision as of 10:32, 6 March 2025
The AXYZ Innovator can automatically switch between three different tools, and also has the capability to use additional tools if they are swapped over by hand.
Picking up tools using the ATC
- Clear the safety mat and turn the SAFETY RESET key.
- Type F 31.n and press Enter, where n is the number of the tool you wish to pick up. For example, type F 31.1 to pick up the tool in ATC pocket one, F31.2 for pocket two, or F 31.3 for pocket three.
Depositing tools from the spindle into the ATC
- Clear the safety mat and turn the SAFETY RESET key.
- Type F 34 and press Enter.
- The machine will deposit the tool currently in the spindle into the ATC holder. If it isn't from the ATC (i.e. the tool number is greater than 3) it will prompt you to remove the tool manually.