Work Offsets (Haas ST-15Y): Revision history

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

24 January 2024

23 January 2024

  • curprev 23:5023:50, 23 January 2024‎ A.Dunbar talk contribs‎ 2,613 bytes +169‎ No edit summary Tag: Visual edit
  • curprev 23:4123:41, 23 January 2024‎ A.Dunbar talk contribs‎ 2,444 bytes +2,444‎ Created page with "== Methods for setting the Z offset == === Rough setting === This method is suitable for first operations only, where length accuracy is not a primary consideration. * Switch to a turning tool, such as T2. * Bring the tool close to the front face of the material, about a millimeter away from the face * The tool should be a few millimeters outside the OD of the stock to prevent colliding with the stationary material. * Slowly bring the tool towards the face of the stoc..." Tag: Visual edit
Retrieved from "https://www.makeinsalford.com/wiki/Work_Offsets_(Haas_ST-15Y)"