View source for Connecting to the Laser Cutter (Epilog Fusion Edge 36)


{| class="wikitable"
|+
|
|Turn on the laser cutter power. 
Wait for the machine to start up and home itself before continuing with the next steps. 
|-
|[[File:Epilog-job-manager-start-menu.png|thumb|300x300px|none]]
|Open '''Epilog Job Manager''' from the Start Menu or the Desktop.
|-
|[[File:Epilog-job-manager-add-laser.png|thumb|300x300px|none]]
|If the Fusion Edge 36 is listed as a laser then you are done - start laser cutting!
If the machine ''isn't'' shown click on '''Add Laser System'''. This may be a large button with text in the centre of the screen, or a [[:File:Epilog-job-manager-add-laser-plus.png|small plus icon]] in the top left.
|-
|[[File:Epilog-job-manager-finding-laser.png|none|thumb|300x300px]]
|Click '''Add Manually'''.
|-
|[[File:Epilog-job-manager-fusion-edge-36-select-series.png|none|thumb|300x300px]]
|Select '''Fusion Edge''' as the system series, then '''Fusion Edge 36''' as the laser model. 
Click Next. 
|-
|[[File:Epilog-job-manager-fusion-edge-36-laser-power.png|none|thumb|300x300px]]
|Select '''60 watts''' for the CO2 laser tube option. 
Click Next. 
|-
|[[File:Epilog-job-manager-fusion-edge-36-ip-address.png|none|thumb|300x300px]]
|Enter the IP address '''146.87.67.51''' in the text box. 
You do not need to enter a serial number.  

Click Next. 
|-
|[[File:Epilog-job-manager-fusion-edge-36-name.png|none|thumb|300x300px]]
|Give the machine the name '''Fusion Edge 36'''.
Click '''Finish''', then close Epilog Job Manager. 
|}
[[Category:Laser Cutter]]