Jump to content

Make In Salford

View source for Tailstock (Haas ST-15Y)

← Tailstock (Haas ST-15Y)

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page.

In order to support long material [[Haas ST-15Y|the lathe]] has a hybrid hydraulic-manual tailstock. This tailstock can hold tools with an MT3 taper, such as a live centre.

Always remove tools from the tailstock to reduce the risk of collisions with [[Automatic Tool Turret (Haas ST-15Y)|the tool turret]].

Return to Tailstock (Haas ST-15Y).

Retrieved from "https://www.makeinsalford.com/wiki/Tailstock_(Haas_ST-15Y)"