...rograms that work with demo parts ready to run. You only need to place the part roughly in the correct place on the surface plate and run the program.
== Demo Training Part ==
...
2 KB (333 words) - 21:01, 12 December 2023
This introductory part will introduce you to using the CAM workspace inside [[Autodesk Fusion 360|
The CAM/programming portion of this part is self directed, you should watch and follow along with the videos linked
...
2 KB (250 words) - 01:14, 29 August 2024
Read through the wiki page for each part and look over the drawing for each part. The drawing will give hints as to the best method to program and machine t
* [[Mill 0-1 (Training Part)|Mill 0-1]]
...
2 KB (306 words) - 13:35, 27 January 2024
...apply what you have learned from the [[Mill 0-1 (Training Part)|Mill 0-1]] part.
* Start machining from the "bottom" of the part, with the round boss facing upwards.
...
3 KB (521 words) - 09:02, 21 February 2024
This introductory part will introduce you using the CAM workspace inside Fusion 360 to prepare wor
The CAM/programming portion of this part is self-directed, you should watch and follow along with the videos linked
...
2 KB (306 words) - 20:09, 18 December 2023
| training = yes
== Training ==
...
4 KB (579 words) - 10:49, 3 June 2024
== Training ==
* A machined part you wish to measure
...
3 KB (522 words) - 15:58, 8 January 2024
| training = yes
== Training ==
...
4 KB (565 words) - 12:50, 2 December 2024
| training = yes
...ll or drill to remove material from the parent stock, leaving the finished part at the end.
...
4 KB (657 words) - 18:05, 10 January 2024
| training = yes
...access to all of the work area without colliding with the chuck or another part of the machine enclosure.
...
5 KB (775 words) - 10:56, 2 August 2024
