639
edits
Frost Vibratory Tumbler: Difference between revisions
m
→Usage Information
No edit summary |
|||
| Line 18: | Line 18: | ||
Wear nitrile gloves when you are working in and around the tumbler. The slurry that is produced is messy and may stain your skin for a while because it contains very fine abrasive media. You will need to thoroughly clean your parts after tumbling, especially if they are going on for further processing like anodising or plating. | Wear nitrile gloves when you are working in and around the tumbler. The slurry that is produced is messy and may stain your skin for a while because it contains very fine abrasive media. You will need to thoroughly clean your parts after tumbling, especially if they are going on for further processing like anodising or plating. | ||
Deburring and corner rounding | === Deburring and corner rounding === | ||
You may find your parts come out with softer edges than when they went in - this is an expected part of the tumbling process. You can try to experiment with different media types and different durations. | You may find your parts come out with softer edges than when they went in - this is an expected part of the tumbling process. You can try to experiment with different media types and different durations. | ||