639
edits
Spindle Speed (Axminster AT540PD): Difference between revisions
Spindle Speed (Axminster AT540PD) (view source)
Revision as of 09:50, 12 January 2024
, 12 January 2024no edit summary
(Created page with "== Spindle Speet Pulley Settings == none|thumb|500x500px|Available spindle speed options for the AT540PD Pillar Drill. == Recommended Drill Speed (Metric) == Generally speaking, the smaller the drill bit the faster the spindle should be turning. Larger bits need slower spindle speeds. If possible, perform a test with a sample piece of material to determine the best drill speed for your application. {| class="wikitable" |+From Axm...") |
No edit summary |
||
| Line 1: | Line 1: | ||
It's important to set the spindle speed appropriately for the material you are working with, and the size of the bit. | |||
Generally speaking, the smaller the drill bit the faster the spindle should be turning. Larger bits need slower spindle speeds. If possible, perform a test with a sample piece of material to determine the best drill speed for your application. | |||
Refer to the Recommended Drill Speed table below for a good starting point. | |||
== Safety == | |||
* Turn off the machine at the wall socket before opening the top cover. | |||
* Take care to not trap your fingers in the belts. | |||
== Spindle Speet Pulley Settings == | == Spindle Speet Pulley Settings == | ||
[[File:At540pd-spindle-speed-chart.png|none|thumb|500x500px|Available spindle speed options for the AT540PD Pillar Drill.]] | [[File:At540pd-spindle-speed-chart.png|none|thumb|500x500px|Available spindle speed options for the AT540PD Pillar Drill.]] | ||
== Recommended Drill Speed (Metric) == | == Recommended Drill Speed (Metric) == | ||
{| class="wikitable" | {| class="wikitable" | ||
|+From Axminster AT540PD User Manual, page 22 | |+From Axminster AT540PD User Manual, page 22 | ||