639
edits
Haas UMC-500: Difference between revisions
→Usage Information
No edit summary |
|||
| Line 45: | Line 45: | ||
=== [[Tool Setter (Haas UMC-500)|Tool Probe/Tool Setter]] === | === [[Tool Setter (Haas UMC-500)|Tool Probe/Tool Setter]] === | ||
Mounted on a post in the machine enclosure, the tool probe measures the length and diameter of tools that are in the spindle. Use the tool setter every time a cutting tool is replaced or introduced into the machine to ensure accuracy. Be careful, the sensor tip is sensitive and can easily be snapped if you are careless when moving around inside the machine enclosure. | Mounted on a post in the machine enclosure, the tool probe measures the length and diameter of tools that are in the spindle. Use the tool setter every time a cutting tool is replaced or introduced into the machine to ensure accuracy. Be careful, the sensor tip is sensitive and can easily be snapped if you are careless when moving around inside the machine enclosure. | ||
=== Out-of-hours operation === | |||
If you wish to run this machine out of hours (overnight or on a weekend) you need to [[Compressed Air|request compressed air]] from the building manager. | |||
=== [[Troubleshooting (Haas UMC-500)|Troubleshooting]] === | === [[Troubleshooting (Haas UMC-500)|Troubleshooting]] === | ||
A few issues come up over and over - take a look here to see if your problem has a known solution. | A few issues come up over and over - take a look here to see if your problem has a known solution. | ||