639
edits
Power Up and Power Down (AXYZ Innovator): Difference between revisions
Power Up and Power Down (AXYZ Innovator) (view source)
Revision as of 11:29, 21 December 2023
, 21 December 2023no edit summary
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
* Check the air pressure dial on the regulator at the machine, it should read between 100 and 120 psi. | * Check the air pressure dial on the regulator at the machine, it should read between 100 and 120 psi. | ||
* Check that all of the machine emergency stop switches are released and that the bed is clear of debris. | * Check that all of the machine emergency stop switches are released and that the bed is clear of debris. | ||
* Ensure the rails are clean and clear of debris so that nothing will collide when the machine moves under its own power. Use the hoover to clear out dust and chips if needed. | * Ensure the rails are clean and clear of debris so that nothing will collide when the machine moves under its own power. Use [[Hetty (Hoover)|the hoover]] to clear out dust and chips if needed. | ||
* If there is a USB stick in the USB socket, remove it and place it on top of the machine electrical cabinet. | * If there is a USB stick in the USB socket, remove it and place it on top of the machine electrical cabinet. | ||
* On the machine electrical cabinet turn the power handle to the '''ON''' position, then press the '''ON''' button adjacent. | * On the machine electrical cabinet turn the power handle to the '''ON''' position, then press the '''ON''' button adjacent. | ||
| Line 35: | Line 35: | ||
* If there is a tool in the spindle, remove it. | * If there is a tool in the spindle, remove it. | ||
* Clean the machine thoroughly, and remove any leftover material from the bed. Use the hoover to vacuum chips from the linear rails, the gear racks, inside the tool changer, etc. | * Clean the machine thoroughly, and remove any leftover material from the bed. Use [[Hetty (Hoover)|the hoover]] to vacuum chips from the linear rails, the gear racks, inside the tool changer, etc. | ||
* Hoover | * Hoover the yellow safety pads and under the edges of the machine. | ||
* Unplug the USB stick from the socket and place it on top of the machine electrical cabinet. | * Unplug the USB stick from the socket and place it on top of the machine electrical cabinet. | ||
* Press the '''Power Off''' button on the front of the machine electrical cabinet. | * Press the '''Power Off''' button on the front of the machine electrical cabinet. | ||