Page history

A.Dunbar

→‎Bury the nose of the tool

A.Dunbar

→‎Consistent depth of cuts when finishing

A.Dunbar

→‎Consistent depth of cuts when finishing

A.Dunbar

→‎Consistent depth of cuts when finishing

A.Dunbar

no edit summary

A.Dunbar

no edit summary

A.Dunbar

Created page with "The lathe will give you reasonably accurate parts straight off the machine. If you need something a bit more precise there are a few things you can do to increase your chances of getting a good part off first time. These processes are aimed primarily at prototype and short run parts - a large production run has very different goals and targets so will approach roughing and finishing differently. == Warm up the machine == At the very least Power Up and Power Down (H..."